Hello all,
Sorry, I made a mistake in my previous email. I have removed any edges which
don’t allow the vType ‘private’, however, there are now a bunch of junctions in
the middle of the road segment (on straight road segments). Also, at other
turning points there are sometimes many junctions which separate edges. Is
there a way to remove these?
Attached is an example of this.
Jonathan
From: Jonathan Harper
Sent: 29 March 2018 21:58
To: [email protected]; [email protected]
Subject: Combining Edges Using NetConvert
Hello all,
I’m currently building a small network from OSM -> .net.xml through NetConvert.
I’m attempting to find the average congestion on a given road segment, however,
I have ran into a minor issue. I was wondering if there was a way to combine
the edges between junctions, so that edges which are connected from junction A
to B are counted as a single edge (rather than being split up which is
currently happening).
Further to this, is it possible to define a maximum length of an edge? Given
that the distance between junction A and B is say 100m, and we define the
maximum edge length to be 60m, would it be possible to automatically generate 2
edges between these junctions of lengths 60m and 40m?
Kind regards,
Jonathan
Virus-free. www.avast.com
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
sumo-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sumo-user
