"Edvin Syse" <[EMAIL PROTECTED]> wrote: > Can you tell if this is a Sun Ray 1g or just a Sun Ray 1? The > number 1 is yellow in the "logo" on the DT, and it says model > SunRayP2 in the logs.. > I was told it was a 1g, but it doesn't say 1g anywhere..
If it's a P2 model then it's a Sun Ray 1, not a 1g. All 1g's manufactured up till now identify themselves as P7. (But not all P7's are 1g's. The SR 170 also uses the P7 electronics and therefore also identifies itself as P7.) Steve described the physical differences: the 1g has a DVI-I monitor connector instead of the VGA connector on the 1, and the 1g has no RCA video input connector. > Jun 17 19:59:04 <hostname> dtlogin[2807]: [ID 118685 user.error] > pam_sunray_amgh::[DPY=2] Error getting authd properties. Cannot > proceed with AMGH. Will create a local session It means that the firmware in the DTU has not provided enough information for the AMGH (Advanced Multi-Group Hotdesking) PAM module to try to make a decision about whether this DTU should be redirected to a server in some other Sun Ray host group, so the DTU will remain attached to the local host group. This message should go away once you've upgraded the DTU firmware. AMGH is a new feature in SRSS 3.1. I described it briefly in <http://www.filibeto.org/pipermail/sunray-users/2005-June/000939.html>. OttoM. __ ottomeister Disclaimer: These are my opinions. I do not speak for my employer. -- ___________________________________________________________ Sign-up for Ads Free at Mail.com http://promo.mail.com/adsfreejump.htm _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
