Hi, I am trying to setup a Sun Ray 2 system based around Ubuntu. I have followed the instructions from the UbuntuOnSunRay web page (https://help.ubuntu.com/community/UbuntuOnSunRay) but am still unable to boot a client.
My Sun Ray 2 starts and displays code 21, then it displays 22D (paremeters received) and shows it's IP address - nothing more happens and then it reboots and the cycle continues. The little box that displays the codes shows the IP address under the client icon - but there is no server IP address shown - I noticed when i first did this and the client downloaded new firmware it displayed the server address where it was obtaining the new firmware version from. I am using SRSS 3.1.1 (Linux). here is some information that might be useful: /opt/SUNWut/sbin/utadm -l LAN connections: On /opt/SUNWut/sbin/utadm[3574]: lease_file: parameter not set cat: /var/opt/SUNWut/tmp/dhcpdHosts.26425: No such file or directory Subnetwork: 192.168.0.0 Interface= eth0 (192.168.0.11) Netmask= 255.255.255.0 Broadcast= 192.168.0.255 Router= 192.168.0.11 AuthSrvr= 192.168.0.11 AltAuth= 192.168.0.11 FirmwareSrvr= 192.168.0.11 NewTver= 3.1_120879-05_2006.09.20.12.31 IP assignment= 0/10 (192.168.0.245) sudo /opt/SUNWut/sbin/utadm -p Interface Host Network Netmask Assigned IPs /opt/SUNWut/sbin/utadm[3568]: lease_file: parameter not set cat: /var/opt/SUNWut/tmp/dhcpdHosts.25867: No such file or directory eth0 poseidon-eth0 192.168.0.0 255.255.255.0 0/10 sudo /opt/SUNWut/sbin/utquery -d 192.168.0.254 terminalID=00144f488c8d terminalIPA=192.168.0.254 model=SunRayP8 Subnet=255.255.255.0 Router=192.168.0.1 LeaseTim=720000 DHCPServer=192.168.0.11 AuthSrvr=192.168.0.11 LogHost=192.168.0.11 FwSrvr=192.168.0.11 NewTVer=3.1_120879-05_2006.09.20.12.31 parmsVersion=3.1_120879-05_2006.09.20.12.31 parmsBarrier=310 currentAuth=192.168.0.11 currentFW=3.1_120879-05_2006.09.20.12.31 currentBarrier=310 currentBarrierLevel=310 ps -ef |grep SUN /opt/SUNWut/srds/lib/utdsd -p 7012 /opt/SUNWut/lib/utmountd /bin/ksh -p /opt/SUNWut/lib/utlog -o /var/opt/SUNWut/log/utmountd.log /opt/SUNWut/lib/utstoraged -r /bin/ksh -p /opt/SUNWut/lib/utlog -o /var/opt/SUNWut/log/utstoraged.log /opt/SUNWut/lib/utsessiond -r -c /etc/opt/SUNWut/auth.permit /opt/SUNWut/lib/utsessiond -r -c /etc/opt/SUNWut/auth.permit /opt/SUNWut/lib/utdevmgrd -r -c /etc/opt/SUNWut/auth.permit /opt/SUNWut/lib/utdevmgrd -r -c /etc/opt/SUNWut/auth.permit /opt/SUNWut/lib/utparalleld -r /opt/SUNWut/lib/utparalleld -r /opt/SUNWut/lib/utseriald -r /opt/SUNWut/lib/utseriald -r I have noticed that the utstoraged shows that the storaged service keeps restarting (every few seconds) but I don't think that is my problem at this time. Can anyone shed some light on possible causes? I'd say the client can't find/communicate with the Sun Ray server, but all the pieces of the puzzle seem to be there. Quick question - on the setup it asked for the "router" IP address, what IP what is this refering to? I have set it to be my internet/firewall router, but in hindsight I don't know why it would need to know that as it connects directly to my server. Guidance would be appreciatted. Many thanks. -- Regards Sean Clarke --------------------------------------------- SEC Consulting Limited Phone: +44 (0)23 8040 5599 Website: http://www.sec-consulting.co.uk Email: [EMAIL PROTECTED] SEC Consulting is a Sun Partner Advantage Member: Sun, keeping 10 moves ahead. http://www.sec-consulting.co.uk/Sun/index.html
pgp90MJl2B7wJ.pgp
Description: PGP signature
_______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
