I am setting it up in CAM config mode, with a custom
script to point the user to their desktop (vmware
windows xp instance). I have also setup a new script
to do exactly what you say and just start an xterm
window and it still resets.
By resetting, here is what I see. I power on the DTU,
it gets an IP address from the DHCP server, gets it's
configuration, then starts whatever session is thinks
it should start (uttsc or the pre-outlined xterm
window). No matter what the script calls to do, it
starts it then about 3-5 seconds later (regardless if
you do anything or not) it resets, and does the DHCP
all over again (basically like from power-on).
I did fix it, by rebooting the Sun Ray Server itself,
but it has done this in the past (previously thought
it was the script) so I am sure it will happen again
in a few days.
Any ideas what could be causing the issue though?
--- Curtis Cunningham <[EMAIL PROTECTED]>
wrote:
Daniel ..
are you setup in a CAM configuration with a script
that starts ttatsc to
point at a WTS server? Your email would imply that.
You also say you
constantly get the WTS login screen and then it
resets. Please confirm.
If this is not what you see, please describe exactly
what you see from
power on of the DTU. What's the last OSD icon you
see before the reset?
i.e. is it getting DHCP address, finding Sun Ray
server, connecting, etc.
Are you running a CAM script? If so, make a new
script for CAM mode that
just launches an xterm. Start that script and if you
get the xterm as
expected, try executing the previous problem CAM
script (that makes
connection to WTS using ttatsc) from the command
line inside the xterm
and see what failure you get.
Curtis.
Daniel Doby wrote:
Anyone have any experience with the SunRay DTU's
constantly resetting? Everything was working fine
this
morning, I was testing out some USB hot plugging
and
after I disconnected my current session (uttsc
session) and the DTU recycled, came back to
windows
login screen and reset. It's been doing that ever
since. I did a utrestart -c and now all of them
are
resetting (just three test).
It's done this several times before and each time
we
thought it was just our script to control where
the
user's session is directed, but if I put
/usr/openwin/bin/xterm at the top of the script
before
it actually does anything else, it still
resets(and
resets, etc, etc).
Any ideas? I am wondering if our DHCP setup isn't
the
culprit. We are using our regular desktop dhcp
server
with the option 49 set to the ip address of our
sunray
server, which is running dhcp, just not leasing
out
the ip addresses to the DTUs.
While I am sure it's something minute and an
oversight
for our implementation, but I have yet to pinpoint
the
cause.
Daniel
____________________________________________________________________________________
Sucker-punch spam with award-winning protection.
Try the free Yahoo! Mail Beta.
http://advision.webevents.yahoo.com/mailbeta/features_spam.html
_______________________________________________
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://node1.filibeto.org/mailman/listinfo/sunray-users
--
Desktop Technical Specialist
Sun Microsystems
accessline: (310) 464-6289
internal: 41621
_______________________________________________
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://node1.filibeto.org/mailman/listinfo/sunray-users
____________________________________________________________________________________Looking for a deal? Find great prices on flights and hotels with Yahoo! FareChase.
http://farechase.yahoo.com/
_______________________________________________
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://node1.filibeto.org/mailman/listinfo/sunray-users
