Okay, I realize this config may not be technically supported, but want to know if it should work.
I have 3 sunray servers running SRSS 3.1 with Windows Connector software. I set up two of the servers on the same subnet in a failover group. Everything works great. Network config is no interconnect configuration, just using default IP addresses with mulitcast for FoG communication. A few days later attempt to add the third server to failover group. This server is in another building on a different subnet. Have verified with network guys that multicast should route between across the WAN. Run the utreplica -p -a on primary, and utreplica -s on secondary. Also run utfwsync on secondary. Everything completes, no errors, but when I run utgstatus on the primary server, it only shows it and the secondary on same subnet. When I run utgstatus on new secondary, it only shows itself. Utreplica -l on primary does show all three servers, and when run on new secondary it does show the correct primary. Snooping the interface for multicast and port 7009 only shows multicast packets staying on the same subnet. My question is If I can work out with network team why multicast packets aren't traversing the WAN then a WAN distributed FoG should work with this setup correct? Thanks, Taylor
_______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
