Probably because you did not confirm/save the settings (I left that step
out). After you add the dtterm app and make it available, From the CAM
menu Click Confirm, click Confirm Settings, then do a restart.
Seth Galitzer wrote:
Craig,
I followed your instructions step-by-step. After the cold restart, my
new term app was gone. It is no longer listed in the available apps.
Basically, the config state was reverted to how it was before I made any
changes to the CAM apps. What might cause this?
Thanks.
Seth
Craig Bender wrote:
Typically it's a scripting error that causes cycling. If your uttsc CAM
app is still set to launch and is set to critical that will prevent
anything from working.
Remember "dtsession" in itself is just a windowing manager.
1) Remove everything from the Apps to launch side, save for dtsession
2) Create a Terminal called Term, point to /usr/dt/bin/dtterm
3) Set attribute as Default
4) Save
5) Add this to apps to launch
6) utrestart -c
Seth Galitzer wrote:
Craig,
Thanks for the suggestion. I do have enough CALs for that lab. Like I
said, it's been running happily for three months now. I added the CAM
app to launch dterm and I get the same result. The DTU goes through
status 21, 22A, 26A, 14A, 26A, and then restarts the boot process.
Note I also tried setting the default CAM app to dtsession and I get the
same result. So it looks like CAM isn't behaving properly, or at least
not launching applications. How can I debug this?
Thanks.
Seth
Craig Bender wrote:
Almost sounds like a licensing issue. Do you have enough CAL's?
Create a cam app that points to /usr/dt/bin/dtterm and set it to launch
Then try to run your uttsc command by hand to see the output.
Seth Galitzer wrote:
Greetings,
I've had SRSS running happily now for a few months. Suddenly in the
last couple of days, uttsc just doesn't work. The DTUs are getting an
IP and making their initial connection to the SRSS, but the uttsc
connection never happens.
I just patched uttsc to 124848-02. SRSS (3.1.1) is already at the
latest patch. I haven't done any other patches to the Sol10 SRSS host.
I did install some Windows patches recently on the WTS I'm trying to
get a desktop session on, but they don't look like they're related to
terminal services or rdp. I can get a desktop session to the WTS from
rdesktop on another machine. The SRSS machine can ping all the DTUs
and
the WTS just fine.
I don't see anything obvious telling me the problem in
/var/opt/SUNWut/log/*. I can't seem to find a logfile for uttsc. Is
there one? If so, where?
Can anybody give me any other places to look to try and debug this?
Any
information would be helpful.
Thanks.
Seth
_______________________________________________
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.filibeto.org/mailman/listinfo/sunray-users
