Santiago Lorenzo Puentes wrote:
Hello,
I've VDA Sun-Ray configuration and I've change SUNWvda kiosk script
for comport mapped to the remote virtual Windows XP Professional system.
If you connect a printer to comport, then I think you need to configure
the printer first on
Sun Ray side and then pass that printer queue with uttsc using -r
printer option.
Thanks
P.S.M.Swamiji
Note:These are my personal opinions,nothing to do with my employer
Does anyone have experience with this environment? I've tried to test
it with the following configuration:
- - - - - - - PR20 Configuration page - - - - - - - -
Configuration mode
-------------------------
Emulation: Olivetti
Emulation selection: Temporary
Draft speed: Normal
LQ Type: NLQ1
Paper width: First Line
Buzzer: Y
Interface: RS232
Baud rate: 9600
Bit/Char: 8
Parity: None
Stop bit: 1
DSR: Y
DCD: Y
Paper Edge detection: N
Special forms: N
Olivetti Menu
-------------------------
Emulation: PR40+
Passbook: Y
Binding: Horizontal
Side: R
Line buffer PR40 like: N
Char generator: Olivetti
Olivetti char set: E
Char definition: Draft
CPI: 10
Vertical resolution: 1/240
LF+CR: Y
Reset with eject: Y
Top margin PR40 like: Y
Status request: no wait
Option horizontal MSRW + MICR
Standard: DIN/ISO
Displacement: Standard
Duplicate: Y
Retry: 3
Stripe handling: Normal
PNS Selection: Y
PNS #3416: N
PNS #3517: Y
15 CPI: N
PNS #4071: N
PNS #4411: N
PNS #5676: N
PNS #5698: Y
PNS #5775: Y
PNS #8099: N
- - - - - - - .:EOF:. Configuration page .:EOF:. - - - - - - - -
But it hasn't work. I have tried to change bit/char, baud rate, parity
and stop bit configuration but it hasn't work. The cable that connects
printer and Sun-Ray is right and there is data flow through this cable.
When I connect directly the printer to a customer workstation with the
same cable and using the same application it works fine. (My customer
can adjust communication parameters)
I attach output of utseriald in debug mode. (Thanks Stoyan Angelov)
http://www.sun-rays.org/tmp/slorenzo/utseriald-debug-9600-7e1.txt
http://www.sun-rays.org/tmp/slorenzo/utseriald-debug-9600-8n1.txt
Thank you very much.
Best regards,
Santiago Lorenzo
Department of Professional Services
[EMAIL PROTECTED]
www.uniway.es
Tel.: +034 91 579 96 10
Fax : +034 91 570 07 16
Building TECNUS
Bravo Murillo 178, 4th Floor
28020 Madrid, Spain
------------------------------------------------------------------------
_______________________________________________
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.filibeto.org/mailman/listinfo/sunray-users
