I'm trying to get a HID signature pad working on OEL 5.6+SRS 5.3
The pad requires 1 library file (/usr/lib) and one header
file(/usr/local/include) to work properly under linux.
The DTU is able to see the pad as "Teridian Semiconductor Corp".
bash-3.2$ /opt/SUNWut/bin/utusbrun /sbin/lsusb
Bus 001 Device 04a7_049b: ID 04a7:049b Visioneer Strobe XP 100
Bus 001 Device 0fca_8004: ID 0fca:8004 Research In Motion, Ltd.
Blackberry Handheld
Bus 001 Device 1862_0001: ID 1862:0001 Teridian Semiconductor Corp.
I was able to run scanimage (/opt/SUNWut/bin/utusbrun
/usr/local/bin/scanimage) fine with the "Visioneer Strobe XP 100"
connected to the DTU.
The pad works fine on OEL 5.6 with no SRS installed when connected to
the console.
I have tried putting the library file in /opt/SUNWut/lib/ and the header
file in /opt/SUNWut/include/ but that did not work.
From what I have been reading, the signature pad library will need to
be compiled with libusbut support.
Is that correct?
CONFIDENTIALITY NOTICE: This communication (including all attachments) is
confidential and is intended for the use of the named addressee(s) only and
may contain information that is private, confidential, privileged, and
exempt from disclosure under law. All rights to privilege are expressly
claimed and reserved and are not waived. Any use, dissemination,
distribution, copying or disclosure of this message and any attachments, in
whole or in part, by anyone other than the intended recipient(s) is strictly
prohibited. If you have received this communication in error, please notify
the sender immediately, delete this communication from all data storage
devices and destroy all hard copies.
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
