Am 28.05.2014 19:03, schrieb Nicolás:
> Hi people,
> 
> I'm writing this mail as my last resource because currently I'm in a
> deadlock, so I hope someone could shed some light on this problem. I'm
> trying to run SRS v. 5.4.0.0.44 together with SROS v. 11.1.3.0.26 on a
> RHEL6 64b distribution. I've followed these steps:
> 
> * Removed the ::1 entry from /etc/hosts, and added a line with the
> actual host with the corresponding static IP of the server.
> * Disabled SELinux and iptables (plus I removed it from the init via
> chkconfig iptables off)
> * Downloaded the public Oracle repo from
> http://public-yum.oracle.com/public-yum-ol6.repo, disabled all
> repositories except ol6_u5_base, ol6_UEK_base and ol6_gdm_multiseat. I
> also run 'yum update' after the changes and installed any proposed package.
> 
> Before installing SRS & SROS, I run 'utpkgcheck' and 'utpkgcheck -i',
> any package is installed successfully so then I could see:
> 
> [root@srs ~]# /opt/SUNWut/sbin/utpkgcheck
> Checking required dependent packages
> All dependent packages are installed
> 
> At this point I installed both the SROS and SRS packages, this latter
> via the 'utsetup' command. Everything goes smoothly, no errors. I also
> configured the kiosk mode as this is my aim. As proposed, I rebooted.
> 
> Once restarted, I run these 3 commands:
> 
> /opt/SUNWut/sbin/utadm -L on
> /opt/SUNWut/sbin/utstart
> /etc/init.d/utsyscfg start
> 
> No errors shown in the '/var/opt/SUNWut/log/messages' file. Well, and
> now comes the problem: I turn on the Sun-Ray client, it downloads the
> latest firmware from the server, and gets stuck at the '26D' screen. No
> matter what I do, really, I can't get through that step. I connected to
> the Web Administration and chose the kiosk mode, also tried with mobile
> sessions. In this latter case, I'm asked for the user and password, once
> entered, the same happens.
> 
> I'm aware this is related to the fact it can't init a graphic session,
> but there's no error in the log, so I can't find out what else to do to
> know what's going wrong. All I can see in the log is this:
> 
> May 28 14:37:00 srs xinetd[1789]: START: tftp pid=2905 from=10.107.19.56
> May 28 14:37:02 srs utauthd: Worker7 NOTICE: whichServer
> pseudo.00144f574400:
> May 28 14:37:02 srs utauthd: Worker7 NOTICE: CLAIMED by StartSession.m5
> NAME: pseudo.00144f574400 PARAMETERS: {stealProtected=true,
> terminalIPA=10.107.19.56, type=pseudo,
> fw=11.1.3.0_26_2013.10.28.09.53,Boot:MfgPkg_4.15_2006.07.20.16.57;
> 2006.07.20-17:04:56-PDT, state=disconnected, cause=insert, doamgh=true,
> barrierLevel=451, lockaction=disconnect, rawId=00144f574400,
> terminalCID=IEEE802.00144f574400, MTU=1500, tokenSeq=1,
> firstServer=0a6b130f, namespace=IEEE802, keyTypes=dsa-sha1-x1,dsa-sha1,
> ddcconfig=1, clientRand=2hIW/4MZB5u9pK8eb09E5Atg5zRPbLE1BVS4hOPinwm,
> id=00144f574400, realIP=0a6b1338, startRes=1280x1024:1280x1024,
> useReal=true, event=insert, sn=00144f574400, rawType=pseudo,
> hw=SunRayP8, initState=1, usersession=false, _=1}
> May 28 14:37:02 srs utauthd: Worker7 NOTICE: CONNECT
> IEEE802.00144f574400, pseudo.00144f574400, all connections allowed
> May 28 14:37:02 srs utauthd: Worker7 NOTICE: MTU = 1500
> May 28 14:37:02 srs utauthd: Worker7 NOTICE:
> SessionManager.getSessionManager: Initiate callback to utsessiond at
> localhost:7007
> May 28 14:37:02 srs utauthd: Worker7 NOTICE:
> SessionManager.initiateCallback localhost:7010 established communication
> May 28 14:37:02 srs utdtsession: Add (11,pseudo.00144f574400,normal)
> 
> And that's all. The DNS records are configured properly, as can be seen
> in the 'utquery' output (being 10.107.19.15 the SRS server's IP address):
> 
> [root@srs ~]# /opt/SUNWut/sbin/utquery -d 10.107.19.56
> terminalID=00144f574400
>     terminalIPA=10.107.19.56
>     model=SunRayP8
>     currentAuth=10.107.19.15
>     currentFW=11.1.3.0_26_2013.10.28.09.53
>     currentBarrier=451
>     currentBarrierLevel=451
>     currentMTU=1500
>     currentLease=17755
>     Subnet=255.255.255.0
>     Router=10.107.19.1
>     LeaseTim=18000
>     DHCPServer=10.1.3.194
>     AuthSrvr=10.107.19.15
>     FwSrvr=10.107.19.15
>     tftpSrvr=10.107.19.15
>     FWservType=FWSrvr
>     speed=100F
>     parmsVersion=11.1.3.0_26_2013.10.28.09.53
>     parmsBarrier=451
>     configMTU=1500
>     AltAuth=10.107.19.15
>     dnsList=10.1.3.130,10.1.5.130,10.1.4.130
>     dname=dns.myplace.es
>     confEnabled=0
>     stopqon=0
>     bandwidth=7500000
>     cmdcachesize=0
> 
> I doubt this is a network related problem, as both the server and the
> client are under the same VLAN. it just seems to not start the X
> session, but I can't diagnoze why. I also tried the 'utcapture' utility
> and no packets are being lost or dropped.
> 
> I neither think this is caused by the java version, as I'm using the
> package's 1.6 jre version:
> 
> [root@srs ~]# /opt/jre1.6.0_41/bin/java -version
> java version "1.6.0_41"
> Java(TM) SE Runtime Environment (build 1.6.0_41-b02)
> Java HotSpot(TM) Server VM (build 20.14-b01, mixed mode)
> 
> There's no 'gdm' process when the clients try to establish the session,
> nor 'Xnewt'.
> 
> I'd be really grateful if someone could provide some additional tests or
> ideas on how to debug this, as I've been really stucked with this for 5
> days and don't know what else to try. If I missed any information just
> ask for it.
> 
> Thanks so much in advance.
> 
> Nicolas
> _______________________________________________
> SunRay-Users mailing list
> [email protected]
> http://www.filibeto.org/mailman/listinfo/sunray-users
Hello Nicolas!

I don't know wether someony else pointed out the following from the
docs:

http://docs.oracle.com/cd/E35310_01/E35308/html/Issues-Login.html#Issues-14703949

2.7.3. Sun Ray Clients hang at 26D when choosing a remote host name from
Choose Host From List option in the dtlogin screen

When trying to log in to a remote system from the dtlogin window,
choosing a remote host name from the Options->Remote Login->Choose Host
>From List option causes the client to hang at 26D.

Workaround: Enter a remote host name using the Enter Host Name option
instead of choosing a remote host name from the list.

Reference: CR 12310031

Maybe that doesn't help you out, but it might protect you from becoming
desperate ;-)

With regards,

Peter Ohlerich.

-- 
----------------------------------------------------------------------
HRZ der Universitaet Bielefeld  Phone: +49 521 106-12604 Fax: -2969
Dipl.-Inf. Peter Ohlerich      Email: [email protected]
P.O.Box 100131                   WWW: http://www.uni-bielefeld.de/hrz/
D-33501 Bielefeld (Germany)
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users

Reply via email to