David Williams wrote: >Hi Folks! >Just got hold of a second CPU board for my S900. Unfortunatly it didn't come >with any instructions and the manual which came with the machine is pretty >useless :( >How do I go about fitting this card in? Do I need a cable to connect the two >boards? If so, does anybody know the pinout? >Both the main CPU and secondary one are 604e's at 233Mhz > >Cheers, >Dave > > > > There are some pictures on the web at:
http://debbiedoesdesign.com/umax/umax_1of1.html I think it will only fit one way. I also seem to recall someone making a connecting cable out of a floppy cable. Better check the archives though..... HTH, Tom -- SuperMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:supermacs@;mail.maclaunch.com> To unsubscribe, email: <mailto:supermacs-off@;mail.maclaunch.com> For digest mode, email: <mailto:supermacs-digest@;mail.maclaunch.com> Subscription questions: <mailto:listmom@;lemlists.com> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
