In order to use a USB card in any of the Old World machines properly you need to download the following items and install them.
USB Card Support 1.4.1.smi CarbonLib 1.6.smi and you also could use the following item USB Support 1.5.5 which comes with the 9.2.2 OS. I started using a Keyspan USB 2 Port card on my C600 and used it with a USB Mouse and Scanner without problems. When I got my two S900's I found that the Keyspan card worked best in the bottom PCI slot #6 on the #1 machine in OS 9.1. I bought a USB/Firewire card on eBay cheap and used that in machine #2 in PCI Slot #1 (A). Now having successfully installed Jaguar on my #1 Machine I had to move the USB card to Slot #1 (A) and all of my USB items work (printer, mouse, scanner). I would also suggest a ram increase in your J700 as OS 9.1 just barely works with just 64 mb of ram and could be part of your problem. I might suggest a ram install of 2 128 mb chips and another 64 mb to bring the machine up to 400 mb and then using OS 9 Helper take and upgrade to 9.2.2 which may improve the support for USB camera input. As I said I have not tried a digital camera input as I don't own one at present. Hope some of this information is helpful. R.Barker -- SuperMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
