Re: [SM] Internal SCII terminator, S900

[Paul Corsa]

Please state your entire configuration. Do you have anything on the 
internal SCSI bus, like a CD? If nothing is plugged into the bus it 
can't be a termination issue. Have you loaded the proper updated drivers 
for your ATI133 card? If you removed the original SCSI CD it would leave 
the 1GB SCSI drive unterminated, but it should not be an issue if it is 
the only item on your SCSI chain. I assume your new CD drive is IDE if 
you are mentioning Master/Slave in relation to it? Your ATI card should 
instruct you on how you need to set items to be connected to it- 
remember on IDEW the Master item is at the end of the cable, the Slave 
is the middle position. Paul C

Barry Gamble wrote:

I am installing a PCI ATT133 card and hard drive.  Want to remove the old
original 1G drive, but the system hangs with no termination on the internal
SCII. Went to the local electronic junk store and found everything but this.
Would installing my new new CD and changing it from slave to master help?  I
didn't think master or slave had anything to do with termination but I
thought I'd ask.   Thank you. 

 



--
SuperMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics    http://www.smalldog.com  | Refurbished Drives |
Service & Replacement Parts   [EMAIL PROTECTED]  |  & CDRWs on Sale!  |
     Support Low End Mac <http://lowendmac.com/lists/support.html>

SuperMacs list info:    <http://lowendmac.com/supermacs/list.shtml>
 --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/>
---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com
---------------------------------------------------------------