Andrey, Sorry to bother you again- Would you mind pointing me in the direction of where to adjust this parameter? I couldn't seem to find it on the wiki.
Kind regards, Nathan On Mon, Dec 5, 2011 at 8:22 PM, Nathan Clark <[email protected]>wrote: > Andrey, > > I didn't realize this could be done, > thanks so much, that's a great solution! > > Nathan > > > On Mon, Dec 5, 2011 at 8:09 PM, Andrey Filippov < > [email protected]> wrote: > >> Hi Nathan, >> >> Why do you need to rotate the SFE by 180? You can just select the >> direction of the readout, so all scanned lines will match. In our >> multi-sensor cameras we do not care much about such rotation, orient SFE in >> one of the two ways depending on the mechanical convenience. >> >> Andrey >> >> On Mon, Dec 5, 2011 at 1:35 AM, Nathan Clark >> <[email protected]>wrote: >> >>> Hi Elphel, >>> >>> I'm hoping to use one of my cameras "upside down" in the new rig I am >>> designing. >>> But I would like to rotate the SFE so that both sensors are the same >>> orientation. >>> >>> Unfortunately, the flex cable that connects to the SFE is too short to >>> support this rotation. >>> >>> Can you offer any ideas for how this might be achieved? >>> Perhaps there is a "crossed" flex cable I could use instead? >>> >>> Alternatively (and perhaps a better option) >>> Are you able to provide a top case that has a tripod mounting socket, >>> just like the bottom case has now? >>> This would be the ultimate solution, as it would allow the camera to be >>> oriented in either configurations. >>> >>> --Nathan >>> >>> _______________________________________________ >>> Support-list mailing list >>> [email protected] >>> >>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>> >>> >> >
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
