On Mon, Jan 30, 2012 at 16:45, Carlos Padial <palidoestud...@gmail.com> wrote: > ok, thank for the fast answer. Your explanation makes a lot of sense. > Now i can record again from camogmgui > > but i cant find were to set fps or shutter in the camcv, but now it > lets me to capture in HD at 13fps...
Shutter is the exposure time, the first slider with the "sun" symbol. I am pretty sure you have an exposure time of longer than 40 ms thats why the FPS decreases automatically. > > elphelvision gets the streaming but remains writing 0byte files even > with the resolutions changed, > but i find something strange... > if i delete autosave.config and start elphelvision, it doesnt show me > the stream (the no-video image is there) but then the recording is > working correctly (but without stream)... DisableLiveVideo=true Thats why you see the image instead of the stream. Stream and recording are 2 different things, they should not influence each other in any way. > > i send you the two config files as i think some value is making all > this, but i cant find it... > > I know elphelvision is a different project, but as the issues with the > hdd where also in camogm i did know where to look... > must i open an issue in the bugtracker? Not yet, lets narrow down the source of the problem before we add any issues to the bug tracker. > > it is common for the camogm not to update the hdd status? actually: no but there seems to be a problem that triggers these symptoms. Regards Sebastian > > thanks again > > 2012/1/30 Sebastian Pichelhofer <sebastian.pichelho...@gmail.com>: >> HI Carlos >> >> Good to see you are starting your hands-on with the camera ;) >> >> >> ElphelVision is an Apertus product not an official Elphel one (I know >> the name is especially confusing....we might have to rename it). So >> the correct place to report bugs is: >> http://bugs.apertus.org/thebuggenie/index.php >> >> The md5s are written by the Apertus in-camera scripts after recording >> finished (under normal conditions). >> >> If the datarate is too high the circbuffer will immediately overflow >> not writing anything to disk ( but the mov/jpeg header - which would >> explain the few bytes you reported). This can be the case if JPEG >> quality ratio is too high. >> >> >> Since the camera returns to its default state after it has been >> rebooted can you please test if everything works fine when you try >> recording with a freshly booted camera with these settings applied in >> camvc: >> 1920x1088 >> 25fps >> RGB color mode >> 80% jpeg quality >> >> Why PHP and filezilla cannot see the files would need some further >> investigation.... >> >> >> Regards Sebastian >> >> On Mon, Jan 30, 2012 at 13:43, Carlos Padial <palidoestud...@gmail.com> >> wrote: >>> Hi >>> >>> I am in the first days with the 353 and i have been recording some >>> videos the last two days >>> and the hdd has been working right, but with some issues when camogm >>> mount the devices. >>> >>> At first it doesnt recognice the device one each three times... then i >>> started using elphelvision, the first time i start elphelvision, it >>> doesn't recognice the hdd, >>> but then i restart elphelvision and everything works. I managed to >>> record some videos correctly. Also from camogm when it recognices the >>> hdd. >>> >>> After that i tried some strange combinations of fps and resolutions >>> (in elphelvision) and the mov files become blank... >>> it creates a lot of mov files without md5 file, and the same size. >>> also strange md5 files over md5 files... like >>> >>> 1327874552_117892.mov >>> 1327874552_117892.mov.md5 >>> 1327874552_117892.mov.md5.md5 >>> 1327874552_117892.mov.md5.md5.md5 >>> >>> now i cannot record with elphelvision, even sometimes it starts >>> recording from the very start of the application... >>> >>> camogm no more detects the hdd. but it lets me to create folders... >>> then it remains showing "nothing mounted" and nothing behind... >>> if i use the php file browser i cant see the folder just created... if >>> i use filezilla ftp i cant see it. >>> but if i use telnet the folder is there... >>> >>> It also happens with movies in camogmgui, i can record (the UI changes >>> to Record and so) >>> but mov files are created, always with 784 bytes and ogm's with >>> 145bytes, and no signal. >>> >>> when Streaming the camera works properly. >>> >>> I tried to format the hdd, following the wiki >>> http://wiki.elphel.com/index.php?title=HDD_Format >>> i dont know what to do in step 3. >>> >>> my cat /proc/partitions says: >>> >>> $ cat /proc/partitions >>> major minor #blocks name >>> >>> 3 0 117220824 hda >>> 3 1 117220820 hda1 >>> 31 0 131072 mtdblock0 >>> 31 1 256 mtdblock1 >>> 31 2 7936 mtdblock2 >>> 31 3 24576 mtdblock3 >>> 31 4 81920 mtdblock4 >>> 31 5 12288 mtdblock5 >>> >>> i followed the wiki without any special commands in step3 and it seems >>> to work , but im not sure. >>> how can i chek the disk? ¿why i cannot see some files in the php >>> browser or filezilla? >>> >>> the disk doesn seems to be damaged, as i can use it to copy files from >>> ftp, it seems to work right. >>> >>> but all videos are mov files 784 bytes and ogm's 145bytes, and black :( >>> >>> what do you think? >>> >>> thanks in advance. >>> carlos padial. >>> >>> _______________________________________________ >>> Support-list mailing list >>> Support-list@support.elphel.com >>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com _______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com