Dear All.
I intend to run an Elphel NC353L [1] on a Raspberry Pi [2], but run into
troubles with the connection. Whenever I connect the camera via
Ethernet, the yellow LED starts to blink, but I cannot connect to the
camera with the Browser. Whenever I ping the camera on 192.168.0.9, the
green LED periodically blinks, but the terminal of the Raspberry Pi
complains that the "host is unreachable".
Whenever I plug the Ethernet cable into my Macbook Pro I get a
connection without troubles. Do I need to configure the Ethernet port on
Debian to talk to the camera while I don't need to do that on OS X?
Whenever I connect a LAN cable I can access the web on the Raspberry Pi,
just not the camera...
I would be grateful for some help,
David
[1]: Currently on loan by the "Swiss office" of Elphel, Alexandre Poltorak.
[2]: http://www.raspberrypi.org/
--
Dr. David Haberthür
Swiss Light Source
Paul Scherrer Institut
WBBA/207
CH-5232 Villigen
+41 56 310 31 80
_______________________________________________
Support-list mailing list
[email protected]
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
