Oleg, Sorry for the flood of messages…
Apparently I can send commands through the port 8081, such bimg, but for instance the image returned is 1 px gif. As if the sensor was not actually running. Is there some command to make a deeper test ? Daniel Le 10 févr. 2017 à 13:36, Daniel Rouan <dan.ro...@free.fr> a écrit : > Oleg, > > Just after ending the previous email, I changed to the connector that is the > closest from the DC/DC converter FKC08-48. (silver box) and the msg returned > by dmesg is changed : the sensor is found ! (see attached). > > But, the browser (firefox) cannot connect anymore. > > regards, > > Daniel > > > <dmesg_result2.rtf> > > Le 10 févr. 2017 à 13:15, Daniel Rouan <dan.ro...@free.fr> a écrit : > >> Oleg, >> >> I changed the cable with a spare one (for my application I had to buy longer >> cables) but the result is the same. >> >> By the way I'm doing the tests with one unique sensor (the other one is at >> another >> place, far away) : is that a problem ? are the 3 connectors on the mux board >> equivalent >> to make the test ? >> >> regards, >> >> Daniel >> >> >> Le 9 févr. 2017 à 18:10, Oleg <support-list@support.elphel.com> a écrit : >> >>> Daniel, >>> >>> I see. Must be something wrong with either cables, sensor boards or a mux >>> board (but it was detected and programmed) - the boards are usually more >>> reliable than the cables. >>> >>> If possible try to reconnect the long cables that connect the mux board >>> (0353-00-08) and sensors (0353-00-15) - see the 3D model (cables not shown). >>> First try the sensor side then the mux side. >>> >>> If that doesn't work - you might have to send us the camera. Contact >>> sa...@elphel.com for details. >>> >>> Best regards, >>> Oleg Dzhimiev >>> Electronics Engineer >>> phone: +1 801 783 5555 x124 >>> Elphel, Inc. >> >
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com