Why does my stable node have so few connections, but my unstable node has many? When I start my stable node it begins with maybe 2 or 3 connections, but when I start my unstable node I get 20 or more connection. I'm using similar config settings between the two node (not the same .conf file). I've reseeded my stable node, but that doesn't help.


Stable

Connections open (Inbound/Outbound/Limit)       7 (0/7/60)
Transfers active (Transmitting/Receiving)       39 (29/10)
Data waiting to be transferred  4,945 Bytes
Total amount of data transferred        310 MiB

Uptime: 0 days, 16 hours, 44 minutes
Current routingTime: 19ms.
Pooled threads running jobs: 16 (13.3%)
Pooled threads which are idle: 24
Current estimated load for rate limiting: 22.4%.
Load due to thread limit = 13.3%
Load due to routingTime = 1.9% = 19ms / 1000ms <= overloadLow (50%)
Load due to messageSendTimeRequest = 28.5% = 285ms / 1000ms <= overloadLow (50%)
Load due to output bandwidth limiting = 22.4% because outputBytes(188378) <= limit (672000.01 ) = outLimitCutoff (0.8) * outputBandwidthLimit (14000) * 60
Load due to expected inbound transfers: 2.6% because: 2172.0 req/hr * 0.0021451008122710495 (pTransfer) * 390533.0 bytes = 1819555 bytes/hr expected from current requests, but maxInputBytes/minute = 1080000 * 60 * 1.1 = 71280000 bytes/hr target
Current estimated load for QueryRejecting: 13.3%.




Unstable

Connections open (Inbound/Outbound/Limit)       52 (0/52/60)
Transfers active (Transmitting/Receiving)       273 (266/7)
Data waiting to be transferred  45 KiB
Total amount of data transferred        None

Uptime: 0 days, 16 hours, 38 minutes
Current routingTime: 0ms.
Pooled threads running jobs: 29 (24.2%)
Pooled threads which are idle: 4
Current estimated load for rate limiting: 154.3%.
Load due to thread limit = 23.3%
Load due to routingTime = 10% = 100ms / 1000ms <= overloadLow (100%)
Load due to messageSendTimeRequest = 154.3% = 1543ms / 1000ms > overloadLow (100%)
Load due to output bandwidth limiting = 0% because outputBytes(0) <= limit (672000.01 ) = outLimitCutoff (0.8) * outputBandwidthLimit (14000) * 60
Load due to expected inbound transfers: 12.4% because: 1878.0 req/hr * 0.012035366406000008 (pTransfer) * 391115.0 bytes = 8840144 bytes/hr expected from current requests, but maxInputBytes/minute = 1080000 * 60 * 1.1 = 71280000 bytes/hr target
Current estimated load for QueryRejecting: 27.5%.
_______________________________________________
Support mailing list
[EMAIL PROTECTED]
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:[EMAIL PROTECTED]

Reply via email to