On Thursday 09 September 2010 08:10:40 artur wrote: > Hi, > > I have a new server to my disposal, which I want to use to run freenet. > > To make better utilisation of the systems reccources, I thought about > running two freenet nodes on the system. > > I would run two instances, each with 2 GB dedicated memory. The system > has 8 GB in total and is connected with a 100 MBit interface, the > datacenter is conntecte with multiple gigabit uplinks to the internet. > But to limit the traffic and for better latency, I would limit each node > to 10 Mbit/s (up and down). Node system will be on a RAID 1 and I want > to put the data-storage directories on a RAID 0. > > Would you guys see any problems, if both nodes run on the same IP > addres? (with different ports of couse). > I will connect the two nodes (and my other private nodes) as friends of > couse.
That should work fine. You will need to set the options to enable connecting to local addresses and to include local addresses in your darknet refs. Also IMHO keeping the stores on separate disks is probably better than RAID 0 striping - we don't need the bandwidth, we do need the maximum transactional throughput (seeks).
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ Support mailing list [email protected] http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:[email protected]?subject=unsubscribe
