I currently use a self "created" map (downloaded after selecting a region) where Munich is also included. Thus I modified navit.xml to point to the downloaded .bin file instead of the sample one.
I'll check <vehicle name="Meins" enabled="yes" active="1" follow="1" refresh="1" source="gpsd://localhost" color="#0000ff"/> I haven't changed that line - I've seen that enabled is yes but not looked at the rest of the line, so I'll check that! Thanks! On Wed, Aug 20, 2008 at 10:53 AM, Lothar Behrens < [EMAIL PROTECTED]> wrote: > > Am 20.08.2008 um 08:58 schrieb Bernhard Schauer: > > I've read through *several* Howto's and Wikis on how to configure Navit - I > installed navit from OM's repository and downloaded a binary map which is > included correctly. But even if my GPS has a fix - tangoGPS and AGPS Tool > both showed - Navi does not show the current location nor the current GPS > coordinates to me (instead I'm positioned into the middle of munich, where I > don't be physically). > > Does anyone know this behaviour and/or has a solution for that? > > > Hi, > > first of all, I think, you still using the sample map. > > The initial position is given by the following line: > > <navit center="4832 N 928 E" zoom="256" tracking="0" cursor="0" > orientation="0"> > > The coordinates may change (these are mine). > > Check the vehicle entries. If at least active is 0 then the GPS configured > will not be used. > > <vehicle name="Meins" enabled="yes" active="1" follow="1" refresh="1" > source="gpsd://localhost" color="#0000ff"/> > > I have downloaded the germany mapset from navit's downloadpage > (quicklinks), thus this is my configuration for the map: > > <!-- If you dont want to use the sample map, set enabled="no" in the next > line --> > > <mapset enabled="yes"> > > > <map type="binfile" enabled="yes" > data="/media/card/map/germany.bin"/> > > > </mapset> > > Note: > > If you have entered a target and the vehicle is active, navit will consume > much CPU power at startup due to route calculation. > > HTH > > Lothar > > best regards, > > Bernhard Schauer > _______________________________________________ > support mailing list > support@lists.openmoko.org > https://lists.openmoko.org/mailman/listinfo/support > > > -- > Lothar Behrens |Rapid Prototyping ... > Heinrich-Scheufelen-Platz 2 |XSLT Codegeneration > 73252 Lenningen |www.lollisoft.de > > > > > > > > _______________________________________________ > support mailing list > support@lists.openmoko.org > https://lists.openmoko.org/mailman/listinfo/support > >
_______________________________________________ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support