On Fri, Aug 29, 2008 at 9:08 AM, syed yaqoob ali <[EMAIL PROTECTED]>wrote:
> rakshat hooja wrote: > > > > On Wed, Aug 27, 2008 at 7:13 PM, arne anka <[EMAIL PROTECTED]> wrote: > >> >> I did connect to the cu using this command : cu -l /dev/ttyACM0 >> > But still the same response its going back to the menu >> >> > Are you not getting the u-boot terminal on the host PC? > > Rakshat > > ------------------------------ > > No,I am not getting the u-boot terminal on host pc .I have connected the > cu and tried to select the option for usb.It is returning back th same > u-bootmenu on freerunner. > What happens on the host computer after you run cu -l /dev/ttyACM0 And did you do sudo chown uucp.uucp /dev/ttyACM0 before running cu? My output is as follows [EMAIL PROTECTED]:~$ sudo chown uucp.uucp /dev/ttyACM0 [EMAIL PROTECTED]:~$ sudo cu -l /dev/ttyACM0 Connected. ut: usbtty Err: usbtty PCB rev: 0x000 Power: 0mA switching led 2 0 switching led 2 1 switching led 2 0 GTA02v5 # DEVICE_CONFIGURED: 1 DEVICE_CONFIGURED: 1 GTA02v5 # works each and every time. Also in new kernels you no longer need to set console to USB as it is already set by default (atleast in my experience. Update me if this works. Rakshat > > > > > _______________________________________________ > support mailing list > support@lists.openmoko.org > https://lists.openmoko.org/mailman/listinfo/support > > -- -------------- Please use Firefox as your web browser. Its protects you from spyware and is also a very feature rich browser. www.firefox.com
_______________________________________________ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
