On Mon, Sep 1, 2008 at 9:31 AM, Ali <[EMAIL PROTECTED]> wrote: > > Hi, > This is the output of printenv on u-boot prompt. > > ================================================================================= > menu_1=Boot from microSD (FAT+ext2): setenv bootargs ${bootargs_base} > rootfstype=ext2 root=/dev/mmcblk0p2 rootdelay=5 ${mtdparts} init=/sbin/init > ro; mmcinit; fatload mmc 1 0x32000000 ${sd_image_name}; bootm 0x32000000 [...] > menu_9=Boot 200808 from microSD (FAT+ext3): setenv bootargs ${bootargs_base} > rootfstype=ext3 root=/dev/mmcblk0p2 rootdelay=5 ${mtdparts} ro; mmcinit; > fatload mmc 1 0x32000000 ${sd_image_name}; bootm 0x32000000
Although a n00b at this myself, the only difference I can see between menu_1 and menu_9 above is that menu_1 contains an "init=/sbin/init" clause while menu_9 does not... however, when I tried Qtopia on SD (FAT + ext2) I didn't muck around with any of this, and menu_1 worked fine for me... is it possible that adding the "init=/sbin/init" clause would help? Ed. _______________________________________________ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support