Hi, Am Mittwoch, den 03.09.2008, 12:14 -0700 schrieb Chris Jenks: > I understand that the GPS device is accessed through > /dev/s3c2410_serial1 in debian rather than through /dev/ttySAC1 as under > 2008.8 (BTW, GPS under 2008.8 worked for me). However, I'm not getting any > s3c2410_serial1 appearing in my /dev, and my debian is up to date, with > kernel 2.6.24. All that dmesg says about s3c2410_serial1 is: > > s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440 > > I couldn't find a module to load. I know other people have this working in > debian, but I thought I followed the wiki closely. Any suggestions?
Did you install Debian via the installer? This should have installed a udev rule that renames the serial device to the usual /dev/ttySAC1. If that’s the case, where did you find the information about the device name /dev/s3c2410_serial1? Thanks, Joachim -- Joachim "nomeata" Breitner Debian Developer [EMAIL PROTECTED] | ICQ# 74513189 | GPG-Keyid: 4743206C JID: [EMAIL PROTECTED] | http://people.debian.org/~nomeata
signature.asc
Description: Dies ist ein digital signierter Nachrichtenteil
_______________________________________________ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
