On Fri, 2008-09-05 at 11:36 -0700, Marzak wrote: > I checked over the list of supported SD cards and tried a 2GB scandisk > thinking that maybe my SD card had an issue. Same results. > > Is there anything that I missed or did not consider? Anything else I can > try? Could I have a bad SD controller? > I would make sure your file systems aren't corrupted with fsck
Other things you could try are leaving the SD clock on with the command echo 1 > /sys/module/glamo_mci/parameters/sd_idleclk and if that doesn't work try increasing the bus drive with echo 1 > /sys/module/glamo_mci/parameters/sd_drive, or maybe 2 These are only temporary fixes but might get to the bottom of the problem Unless you have the latest kernel with this fix ca19d156400f817960efe0d14680324b2ea34171 don't do suspends/resumes Simon _______________________________________________ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support