Hi, I recently bought the new openmoko freerunner and was trying to connect to my campus wifi n/w with the following /etc/network/interfaces and /etc/wpa_supplicant/wpa_supplicant.conf ...
*********************** * interfaces* file *********************** # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8) # The loopback interface auto lo iface lo inet loopback # Wireless interfaces #iface wlan0 inet dhcp #wireless_mode managed #wireless_essid any #iface atml0 inet dhcp # Wired or wireless interfaces auto eth0 iface eth0 inet dhcp wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf iface eth1 inet dhcp # Ethernet/RNDIS gadget (g_ether) # ... or on host side, usbnet and random hwaddr ### USB WORKS FINE ### auto usb0 iface usb0 inet static address 192.168.0.202 netmask 255.255.255.0 network 192.168.0.0 gateway 192.168.0.200 up echo search something > /etc/resolv.conf up echo nameserver something >> /etc/resolv.conf # Bluetooth networking iface bnep0 inet dhcp ***************************************** * wpa_supplicant.conf* file ***************************************** ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=0 eapol_version=2 ap_scan=1 fast_reauth=0 network={ ssid="WATERVIEW" key_mgmt=IEEE8021X eap=PEAP ca_cert="/etc/verisign.pem" phase1="peaplabel=1" phase2="auth=MSCHAPV2" identity="**something**" password="**something**" } ******************************************* * /etc/init.d/wlan start* output ******************************************* Starting wlan: ioctl[SIOCSIWENCODEEXT]: Operation not supported ioctl[SIOCSIWENCODEEXT]: Operation not supported ioctl[SIOCSIWENCODEEXT]: Operation not supported ioctl[SIOCSIWENCODEEXT]: Operation not supported CTRL-EVENT-SCAN-RESULTS Trying to associate with 00:02:2d:60:9e:6d (SSID='WATERVIEW' freq=2437 MHz) Authentication with 00:02:2d:60:9e:6d timed out. CTRL-EVENT-SCAN-RESULTS Trying to associate with 00:02:2d:60:9e:6d (SSID='WATERVIEW' freq=2437 MHz) Authentication with 00:02:2d:60:9e:6d timed out. CTRL-EVENT-TERMINATING - signal 2 received (*did a ctrl+c here ... *) ******************************************** *iwlist scanning* output ******************************************** lo Interface doesn't support scanning. usb0 Interface doesn't support scanning. eth0 Scan completed : Cell 01 - Address: 00:1D:7E:6D:C1:DB ESSID:"25201" Mode:Master Frequency:2.412 GHz (Channel 1) Quality=2/94 Signal level=-93 dBm Noise level=-95 dBm Encryption key:on Extra:bcn_int=100 Extra:wpa_ie=dd180050f20101000050f20201000050f20201000050f2020c00 Extra:wmm_ie=dd180050f2020101000003a4000027a4000042435e0062322f00 Cell 02 - Address: 00:02:2D:60:9E:6D ESSID:"WATERVIEW" Mode:Master Frequency:2.437 GHz (Channel 6) Quality=19/94 Signal level=-76 dBm Noise level=-95 dBm Encryption key:on Extra:bcn_int=100 Cell 03 - Address: 00:02:2D:60:9E:76 ESSID:"WATERVIEW" Mode:Master Frequency:2.437 GHz (Channel 6) Quality=6/94 Signal level=-89 dBm Noise level=-95 dBm Encryption key:on Extra:bcn_int=100 ********************************************* *ifconfig eth0* output ********************************************* eth0 Link encap:Ethernet HWaddr 00:12:CF:8E:EC:CE BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:1627 errors:0 dropped:0 overruns:0 frame:0 TX packets:526 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1115762 (1.0 MiB) TX bytes:9172 (8.9 KiB) ********************************************* *iwconfig *output ********************************************* lo no wireless extensions. usb0 no wireless extensions. eth0 AR6000 802.11g ESSID:"" Mode:Managed Bit Rate=1 Mb/s Tx-Power=0 dBm Sensitivity=0/3 Retry:on Encryption key:off Power Management:on Link Quality:0/94 Signal level:-95 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ********************************************************************************************************* Any Suggestions anybody? Would appreciate the help. The same configuration of interfaces and wpa_supplicant.conf works very well on my ubuntu laptop. Thanks a million for the support. Savio Monteiro.
_______________________________________________ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support