2008/9/10 Michael Shiloh <[EMAIL PROTECTED]> > Joachim Ott wrote: > > Before trying this: would it work to give USB power to the pins where > > the battery connects in order to revive the FR or will that cause damage > > in the device? The output of the USB is about 4.56 V and (I think) 500 > mA. > > It's fine. Just be very careful. If the polarity is wrong, or you touch > the wrong pins, or you give the wrong voltage you will almost certainly > damage your FreeRunner. Hook everything up, then get a friend to look > and confirm you've done it correctly before you turn on the USB power.
Don't worry. I will use isolated alligator clips and check before, that + goes to the red clip and - to the black clip and check once more, to which pins red and black must be connected. I will also take pictures of that operation.
_______________________________________________ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support