El mar, 23-09-2008 a las 12:24 +0200, Konstantin escribió: > I installed FDOM on my SD Card (2 GB), and at first everything (including PIN > entry) was working fine, but now (I did an opkg upgrade at some point, but I'm > not sure if this is in any way connected) Believe me, it tighly connected :) > after booting the PIN-entry dialog > doesn't pop up, and after a while a message stating that qpe died pops up. > > However, I noticed something suspicious in the dmesg output: > > [ 72.370000] BUG: sleeping function called from invalid context at > kernel/mutex.c:207 > [ 72.370000] in_atomic():0, irqs_disabled():128 > [ 72.370000] 2 locks held by gesd/1426: > [ 72.370000] #0: (&evdev->mutex){....}, at: [<c01d3f94>] > evdev_open+0xec/0x18c > [ 72.370000] #1: (&dev->mutex){....}, at: [<c01cefe4>] > input_open_device+0x24/0xac > [ 72.370000] [<c002dbfc>] (dump_stack+0x0/0x14) from [<c0042d34>] > (__might_sleep+0xdc/0xf8) > [ 72.370000] [<c0042c58>] (__might_sleep+0x0/0xf8) from [<c02d0d14>] > (mutex_lock_nested+0x28/0x2a0) > [ 72.370000] r5:c7d76c2c r4:00000047 > [ 72.370000] [<c02d0cec>] (mutex_lock_nested+0x0/0x2a0) from [<c01d4f78>] > (reg_set_bit_mask+0x30/0x6c) > [ 72.370000] [<c01d4f48>] (reg_set_bit_mask+0x0/0x6c) from [<c01d503c>] > (lis302dl_input_open+0x30/0x58) > [ 72.370000] r8:c7d778e0 r7:c7d74660 r6:00000000 r5:c7d76c20 r4:a0000013 > [ 72.370000] [<c01d500c>] (lis302dl_input_open+0x0/0x58) from [<c01cf034>] > (input_open_device+0x74/0xac) > [ 72.370000] r5:c7d7781c r4:c7d74000 > [ 72.370000] [<c01cefc0>] (input_open_device+0x0/0xac) from [<c01d3fc8>] > (evdev_open+0x120/0x18c) > [ 72.370000] r7:00000000 r6:c69ab000 r5:c7d77800 r4:c7d77894 > [ 72.370000] [<c01d3ea8>] (evdev_open+0x0/0x18c) from [<c01d0c3c>] > (input_open_file+0xf0/0x1b4) > [ 72.370000] [<c01d0b4c>] (input_open_file+0x0/0x1b4) from [<c009d534>] > (chrdev_open+0x198/0x1e0) > [ 72.370000] r7:c68353c0 r6:c6892108 r5:c7c6ec60 r4:00000000 > [ 72.370000] [<c009d39c>] (chrdev_open+0x0/0x1e0) from [<c0098770>] > (__dentry_open+0x140/0x228) > [ 72.370000] r7:c009d39c r6:c6892108 r5:00000000 r4:c68353c0 > [ 72.370000] [<c0098630>] (__dentry_open+0x0/0x228) from [<c0098904>] > (nameidata_to_filp+0x34/0x4c) > [ 72.370000] [<c00988d0>] (nameidata_to_filp+0x0/0x4c) from [<c009895c>] > (do_filp_open+0x40/0x48) > [ 72.370000] r4:00000000 > [ 72.370000] [<c009891c>] (do_filp_open+0x0/0x48) from [<c00989bc>] > (do_sys_open+0x58/0xe8) > [ 72.370000] r5:40ba84d8 r4:00000000 > [ 72.370000] [<c0098964>] (do_sys_open+0x0/0xe8) from [<c0098a84>] > (sys_open+0x24/0x28) > [ 72.370000] r8:c00290a8 r7:00000005 r6:00000002 r5:bed0ce44 r4:00012574 > [ 72.370000] [<c0098a60>] (sys_open+0x0/0x28) from [<c0028f00>] > (ret_fast_syscall+0x0/0x2c) > > Maybe that is connected to my problem in any way? When you upgrade the qt-x11 pacakges they usually deletes the tweaked config files that make FDOM work, take a look at the FDOM wiki page at the Warnings > Is this a known problem, or can any of you make something out of this?
Regards > > Regards, > Konstantin > > _______________________________________________ > support mailing list > support@lists.openmoko.org > https://lists.openmoko.org/mailman/listinfo/support _______________________________________________ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support