On Tue, 2008-10-28 at 19:37 +0100, Jette Derriche wrote: > I have configured Wireless LAN, and it seems to work. At least it says > "Online" under Settings -> Internet. But initially it says "pending..." > and then after a while it says "offline". I go into "properties" and > select "Wireless Encryption". I don't change anything.. then press > "back", and then it says "Online"...
Clearly something is not right: ~# route -n Kernel IP routing table Destination Gateway Genmask Flags Iface 192.168.0.0 0.0.0.0 255.255.255.0 U usb0 169.254.0.0 0.0.0.0 255.255.0.0 U eth0 0.0.0.0 192.168.0.200 0.0.0.0 UG usb0 (I removed the Metric, Ref and Use columns, since they are all zero) Apparently the GUI adds double quotes to the key... ---------------------------------------------------------- # ifup eth0 sed: unrecognized option `--quiet' BusyBox v1.11.1 (2008-08-05 02:00:09 CEST) multi-call binary Usage: sed [-efinr] pattern [files...] WPA: Configuring Interface Line 9: Too long WEP key 0 '"3a9b7xxxxxxxxxxxxxxefad62a'. Line 9: failed to parse wep_key0 '"3a9b7xxxxxxxxxxxxxxefad62a'. Line 11: failed to parse network block. Failed to read or parse configuration '/etc/wpa_supplicant/wpa_supplicant.conf'. wpa_supplicant: /usr/sbin/wpa_supplicant daemon failed to start ---------------------------------------------------------- The error disappeared when I removed the quotes around the key in wpa_supplicant.conf ... This is a bit frustrating: ---------------------------------------------------------- [EMAIL PROTECTED]:~# ifup eth0 ifup: interface eth0 already configured [EMAIL PROTECTED]:~# ifdown eth0 cat: can't open '/var/run/udhcpc.eth0.pid': No such file or directory [EMAIL PROTECTED]:~# touch /var/run/udhcpc.eth0.pid [EMAIL PROTECTED]:~# ifdown eth0 ifdown: interface eth0 not configured ---------------------------------------------------------- But aside from that, now I get this: ---------------------------------------------------------- [EMAIL PROTECTED]:~# ifup eth0 sed: unrecognized option `--quiet' BusyBox v1.11.1 (2008-08-05 02:00:09 CEST) multi-call binary Usage: sed [-efinr] pattern [files...] WPA: Configuring Interface Failed to connect to wpa_supplicant - wpa_ctrl_open: Connection refused ioctl[SIOCSIWENCODEEXT]: Operation not supported ioctl[SIOCSIWENCODEEXT]: Operation not supported ioctl[SIOCSIWENCODEEXT]: Operation not supported ioctl[SIOCSIWENCODEEXT]: Operation not supported udhcpc (v1.11.1) started Sending discover... Sending discover... Sending discover... No lease, failing ---------------------------------------------------------- My config files: ---------------------------------------------------------- # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8) # The loopback interface auto lo iface lo inet loopback # Wireless interfaces iface wlan0 inet dhcp wireless_mode managed wireless_essid any iface atml0 inet dhcp # Wired or wireless interfaces iface eth0 inet dhcp wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf iface eth1 inet dhcp # Ethernet/RNDIS gadget (g_ether) # ... or on host side, usbnet and random hwaddr auto usb0 iface usb0 inet static address 192.168.0.202 netmask 255.255.255.0 network 192.168.0.0 gateway 192.168.0.200 # Bluetooth networking iface bnep0 inet dhcp ----------------------------------------------------------- ----------------------------------------------------------- ctrl_interface=/var/lib/wpa_supplicant ctrl_interface_group=0 eapol_version=1 fast_reauth=1 ap_scan=1 network={ ssid="OMNIX" wep_key0=3a9b7xxxxxxxxxxxxxxefad62a key_mgmt=NONE } ----------------------------------------------------------- I have also tried iwconfig with no luck.... Adding the IP of my router or openDNS nameservers to resolv.conf, does not help either... Any ideas? /Jette _______________________________________________ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support