I don't have /dev/ttSAC0 ... I'm going to assume ttySAC0 is the same thing.
Below I have the output from 2007.2/2008.4, since it's the most recent thing I flashed (to try using GSM manually) If you think another distribution would give different output that would be more useful for your purposes, let me know. My modem did work with FSO (I used milestone 3 briefly, and milestone 4 for a little bit longer) when it worked. I never got a chance to try SHR while it was working. I never tried debugging my modem while it was working, so I don't know what parts of its behavior are normal and what parts are new. r...@om-gta02:~# stty -a -F /dev/tty /dev/tty /dev/tty1 /dev/tty3 /dev/ttySAC0 /dev/ttySAC2 /dev/tty0 /dev/tty2 /dev/tty4 /dev/ttySAC1 r...@om-gta02:~# stty -a -F /dev/ttySAC0 speed 115200 baud; rows 24; columns 80; intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>; eol2 = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0; -parenb -parodd cs8 -hupcl -cstopb cread clocal crtscts -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon -ixoff -iuclc -ixany -imaxbel -opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 -isig -icanon -iexten -echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke r...@om-gta02:~# stty -g -F /dev/ttySAC0 0:0:800018b2:a30:3:1c:7f:15:4:0:1:0:11:13:1a:0:12:f:17:16:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0 William Kenworthy wrote: > > I would appreciate it if you could send me the results of: > > stty -a -F /dev/ttSAC0 > stty -g -F /dev/ttSAC0 > > Gives me some more data for my problem > > Tks, > BillK > -- View this message in context: http://n2.nabble.com/Still-can%27t-register-GSM-tp1649863p2216156.html Sent from the Openmoko Support mailing list archive at Nabble.com. _______________________________________________ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support