Hi! Well, I checked below, but I am still a bit lost / confused. What I find there:
1. lowlevel_foo-gta01bv?-*.bin What's that? The different versions belong to different hardware releases of the GTA01, I guess. AFAIK the version of the device which got shipped to most people is GTA01BV4? So in that case I would use lowlevel_foo-gta01bv4-*.bin. I indeed wonder what will it into 280 / 320 bytes ... 2. u-boot-gta01bv?-*.bin I guess this is the boot loader? Again, one has to choose the version corresponding to the actual hardware revision, I guess. 3. uImage-2.6.??-oe?+*.bin Just guessing ... Are these different kernel images? 4. modules-2.6.??-oe?*-r1-om-gta01.tgz So I guess these are modules for the respective kernels, but why are they a separate .tgz file? I guess this is *not* to be flashed with dfu-util, is it? 5. fso-console-image / fso-image Is this the userland? If yes, why are there two different formats (.jffs2 and .tar.gz) and how would I load either on onto my device? So on my original question, updating my old Neo 1973, I guess I would: 1. Flash lowlevel using dfu-util? 2. Flash u-boot using dfu-util? That should give me a current boot loader again, hopefully, which can deal with recent images. 3. Flash uImage using dfu-util? Then ... ? Regards, Torsten Angus Ainslie schrieb: > On Wed, 2009-02-11 at 18:12 +0100, Torsten Schlabach wrote: >> I also read about a GSM firmware upgrade which I may need. >> > > I'm not sure about the firmware but check below for the bootloader and > filesystem. > >> Is there any page in the Wiki which would provide an overview? >> >> I tried to click my may through http://downloads.openmoko.org/daily/ but >> I got lost a bit trying to decide which files I may need to flash and in >> what order. >> > > I reorganized downloads today, under > http://downloads.openmoko.org/distro there is stable and experimental , > both have a Neo1973 directory that have the latest builds. Please keep > in mind that the Neo1973 images in those directories have not been > tested yet, so please only try those if you're brave/have a debug > board. > > Angus > > > > _______________________________________________ > support mailing list > support@lists.openmoko.org > https://lists.openmoko.org/mailman/listinfo/support _______________________________________________ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support