i put shr unstable on my freerunner and it does have the ar6000 module in the modules directory tried everything so far loaded the ar6000 modules and here is the results of dmesg | grep -i -e ar6000 -e eth0 -e s3c2440-sdi -e mmc1
[21474568.920000] s3c2440-sdi s3c2440-sdi: host detect has no irq available [21474568.985000] s3c2440-sdi s3c2440-sdi: Regulator for SD_3V3 unavilable [21474569.215000] s3c2440-sdi s3c2440-sdi: powered down. [21474569.220000] s3c2440-sdi s3c2440-sdi: initialisation done. [21474569.250000] s3c2440-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz). [21474569.265000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz). [21474569.270000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz). [21474569.285000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz). [21474569.505000] s3c2440-sdi s3c2440-sdi: powered down. [ 1041.720000] s3c2440-sdi s3c2440-sdi: powered down. [ 1043.670000] s3c2440-sdi s3c2440-sdi: host detect has no irq available [ 1043.680000] s3c2440-sdi s3c2440-sdi: Regulator for SD_3V3 unavilable [ 1043.710000] s3c2440-sdi s3c2440-sdi: powered down. [ 1043.710000] s3c2440-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz). [ 1043.720000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz). [ 1043.730000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz). [ 1043.735000] s3c2440-sdi s3c2440-sdi: initialisation done. [ 1043.745000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz). [ 1043.980000] s3c2440-sdi s3c2440-sdi: powered down. Joachim Ott-2 wrote: > > 2009/9/28 edgezorz <edge.f...@gmail.com>: >> >> the search for ar6000 returned nothing, i'm not sure if its supposed to >> be a >> module in the fso release or not though, i checked the modules directory >> and >> there were modules for other stuff. Perhaps i should put shr on my >> freerunner to check > > I have it here: > > $ find /lib/modules -name ar6000.ko > /lib/modules/2.6.29-rc3/kernel/drivers/ar6000/ar6000.ko > > One last try to check if it is built into the kernel: > > $ strings -a /dev/mtd3 | grep AR6000 > > (or wherever your kernel is, when your system is on SD-card) > > This should show about 10 lines. If not, maybe someone has forgotten > to include the driver. > > _______________________________________________ > support mailing list > support@lists.openmoko.org > https://lists.openmoko.org/mailman/listinfo/support > > -- View this message in context: http://n2.nabble.com/no-wifi-on-freerunner-fso-tp3212485p3730815.html Sent from the Openmoko Support mailing list archive at Nabble.com. _______________________________________________ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support