Am I right in thinking you're using the debug board to get a serial port level shifted to 3.3V, and connecting that to the Calypso serial interface through the headset jack?
On Tuesday 29 March 2011, Dave Schmidt wrote: > ...and sorry for not being able to send email neither, > > > Answer found, sorry for doing it only AFTER posting :) > > I am (was) missing the debug board and > > and ftdi_sio module. > > After doing > > sudo rmmod ftdi_sio > sudo modprobe ftdi_sio vendor=0x1457 product=0x5118 > > the debugging board is recognized: > > ftdi_sio 2-2.1:1.1: FTDI USB Serial Device converter detected > usb 2-2.1: Detected FT2232C > usb 2-2.1: Number of endpoints 2 > usb 2-2.1: Endpoint 1 MaxPacketSize 64 > usb 2-2.1: Endpoint 2 MaxPacketSize 64 > usb 2-2.1: Setting MaxPacketSize 64 > usb 2-2.1: FTDI USB Serial Device converter now attached to ttyUSB0 > > Thanks for patience! :) > > D. _______________________________________________ support mailing list [email protected] https://lists.openmoko.org/mailman/listinfo/support
