http://www.pfsense.com/old/ is our older stuff but it really doesn't
go so far back.  Sorry!

Scott


On 8/1/05, Kyle Mott <[EMAIL PROTECTED]> wrote:
>  Man, I cant even get a fresh install from 0.62.3 and update to 0.73 to
> work. I *always* get the following execve error:
>  dhclient[1375]: exiting.
>  dhclient[1375]: exiting.
>  dhclient[1375]: connection closed
>  dhclient[1375]: connection closed
>  dhclient[1374]: exiting.
>  dhclient[1374]: exiting.
>  dhclient[1374]: vx0: not found
>  dhclient[1374]: vx0: not found
>  dhclient[1376]: exiting.
>  dhclient[1376]: exiting.
>  dhclient[1376]: execve (/etc/dhclient-script, ...): No such file or
> directory
>  dhclient[1376]: execve (/etc/dhclient-script, ...): No such file or
> directory
>  
>  Where is the archive ISO's located? I wanna try installing 0.67.8 and then
> upgrading to 0.72 or 0.73.
>  
>  
>  
>  -Kyle Mott
> 
>  
>  
> 
>  
>  
>  Wesley Joyce wrote: 
>  
>  
> 
> Kyle, in my experience, installing 0.67.8 from ISO and upgrading to 0.73
> works.  Installing 0.72 from ISO does not work. 
> 
>   
>  
>  
>  ________________________________
>  
> 
> From: Kyle Mott [mailto:[EMAIL PROTECTED] 
>  Sent: Monday, August 01, 2005 11:30 AM
>  To: analyzerx
>  Cc: Scott Ullrich; Wesley Joyce; [email protected]
>  Subject: Re: [pfSense Support] Issue installing 0.71.12 ISO to HD 
> 
>   
> 
> I've tried 0.72, and that panics at 50% also. I'll probably try an older
> version and then upgrade when I get home today, but Id really like to try
> the newer version(s).
>  
>  I also seem to be having an issue when I go to restore my config, I always
> get a weird 'execve' error for my WAN DHCLIENT config. I havent been able to
> track it down, but I'll keep working on it.
>  
>  
>  
>  
>  -Kyle Mott 
>  
> 
>   
> 
> 
>  
>  analyzerx wrote: 
> 
> try installing a older version and upgrading (0.6.X seem to be working fine)
>  also try the new version i think there are some changes for this bug/thing 
>  
> 
> On 8/1/05, Kyle Mott <[EMAIL PROTECTED] > wrote: 
> 
> I'm getting the same exact error, every time I try to install the
>  0.71.12 ISO. I had to revert back to m0n0wall (hopefully temporarily).
>  
>  
>  
>  
>  -Kyle Mott
>  
>  
>  
>  Scott Ullrich wrote:
>  
>  >Does this happen every time you attempt an install or did you only try
> once?
>  >
>  >Scot
>  >
>  >
>  >On 7/30/05, Wesley Joyce <[EMAIL PROTECTED]> wrote:
>  >
>  >
>  >>
>  >>
>  >>
>  >>The exact error I am getting installing 0.71.12 to HD is as follows. 
> After
>  >>doing all the partitioning and selecting of file systems, at
>  >>
>  >>
>  >>
>  >>50% of the '/FreeSBIE/usr/local/bin/cpdup …' command being executed I get
> a 
>  >>
>  >>
>  >>
>  >>Panic: vm_fault: fault on nofault entry: c780400
>  >>
>  >>Cupid = 0
>  >>
>  >>Uptime 1m38s
>  >>
>  >>Dumping 126mb (2 chunks)
>  >> 
>  >>            Chunk 0: 1mb (159 pages) … ok
>  >>
>  >>            Chunk 1: 126MB (32174 pages) 110 94 78 62 46 30 14 … ok
>  >>
>  >>
>  >>
>  >>Dump complete
>  >>
>  >>…snip…
>  >>
>  >>
>  >>
>  >> ________________________________ 
>  >>
>  >>
>  >>Wesley Joyce, Network Administrator
>  >> Network Operations, Information Technology Services
>  >> University of the Virgin Islands
>  >> #2 John Brewers Bay, St. Thomas, USVI 00802-9990 
>  >> (340) 693-1469 (voice) / (340) 693-1545 (fax)
>  >> http://www.uvi.edu/
>  >>
>  >>
>  >>
>  >>
>  >>
>  >>
>  >>
>  >> ________________________________ 
>  >>
>  >>
>  >>From: Wesley Joyce [mailto:[EMAIL PROTECTED]
>  >> Sent: Saturday, July 30, 2005 1:37 PM
>  >> To: 'analyzerx'; [email protected]
>  >> Subject: RE: [pfSense Support] Pre 0.7x ISO
>  >>
>  >>
>  >>
>  >>Thanks.
>  >>
>  >>
>  >>
>  >>I have tried to install pfSense-LiveCD-0.71.12 , pfSense-LiveCD-0.716,
>  >>pfSense-LiveCD-0.70.10 and pfSense-LiveCD-0.70.4 ISO's to hard drive
> using
>  >>the 'installer' and they all either dump during the copy of files to the
>  >>partition, or after rebooting from the hard drive the 1st time, it
> complains 
>  >>about the hard drive and files not being found.  I previously got the
> 0.6x
>  >>series to install.
>  >>
>  >>
>  >>
>  >>Is it supports installing 0.6x and upgrading to the latest 0.71?
>  >>
>  >>
>  >>
>  >> ________________________________
>  >>
>  >>
>  >>Wesley Joyce, Network Administrator
>  >> Network Operations, Information Technology Services 
>  >> University of the Virgin Islands
>  >> #2 John Brewers Bay, St. Thomas, USVI 00802-9990
>  >> (340) 693-1469 (voice) / (340) 693-1545 (fax)
>  >> http://www.uvi.edu/ 
>  >>
>  >>
>  >>
>  >>
>  >>
>  >>
>  >>
>  >> ________________________________
>  >>
>  >>
>  >>From: analyzerx [mailto: [EMAIL PROTECTED]
>  >> Sent: Saturday, July 30, 2005 1:27 PM
>  >> To: [email protected]
>  >> Subject: Re: [pfSense Support] Pre 0.7x ISO
>  >>
>  >>
>  >>
>  >>What seems to be the problem with the installation?
>  >>
>  >> I'm uploading it to my web server in any case, it will take some time
> cause
>  >>I only have 128kbps upload... o_O 
>  >> I'll post the URL once it's done...
>  >>
>  >>
>  
> ---------------------------------------------------------------------
>  To unsubscribe, e-mail: [EMAIL PROTECTED]
>  For additional commands, e-mail: [EMAIL PROTECTED] 
> 
>

Reply via email to