I agree this is still an issue in 0.77. It happens when you change the firewall rules.
It does not matter what is in the ipsec setup. Wheather it is empty or you are using it -----Original Message----- From: Bastian Schern [mailto:[EMAIL PROTECTED] Sent: 19 August 2005 18:56 To: support@pfsense.com Subject: [pfSense Support] There were error(s) loading the rules Hello, I have some problems with pfSense 0.77. I got this message: php: : There were error(s) loading the rules: /tmp/rules.debug:110: syntax error /tmp/rules.debug:111: syntax error /tmp/rules.debug:112: syntax error /tmp/rules.debug:113: syntax error /tmp/rules.debug:114: syntax error /tmp/rules.debug:115: syntax error /tmp/rules.debug:116: syntax error pfctl: Syntax error in config file: pf rules not loaded - The line in question reads [110]: pass quick on rl0 proto esp from 172.16.0.72 to keep state label "IPSEC: esp proto" The Problem is now: The pfSense will nor route anylonger! From the LAN side it is possible to "ping" the WAN interface of the FW (172.16.0.72) but it is not possible to ping any other host (e.g. 172.16.0.71) in front of the WAN interface. Directly from the FW (via webinterface) it is possible to ping hosts in front of the WAN interface. What is going wrong? Regards Bastian --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
