Changed to keyboard and mouse and it's working now. Thanks John
-----Original Message----- From: Scott Ullrich [mailto:[EMAIL PROTECTED] Sent: Sunday, September 11, 2005 12:01 PM To: support@pfsense.com Subject: Re: [pfSense Support] Hang at the end of bootup This happens on USB keyboards for some reason. If you can, use a PC keyboard. Scott On 9/10/05, John Cianfarani <[EMAIL PROTECTED]> wrote: > > > > I'm working on install version 0.82.4 / 0.84 and seem to be having some > troubles. I have gotten it to work fine under vmware though now that I'm > trying to move it to a real machine it doesn't seem to like it. > > > > Essentially after the LiveCD boots and I do my entire interface > configuration it comes to the end with "Bootup complete" and then hangs. > > > > During the initial load there are few error messages that I can see: > > > > This repeats several times: > > acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> > > > > A few lines before the option to setup interfaces I get: > > mount: /: unknown special file or file system > > No Swap on CDROM > > > > After configuring the interfaces there is a line: > > kbdcontrol: cannot open /dev/ukbd0: Device Busy > > > > This and reading some posts in the list made me think the CDROM could be the > problem, I moved it to the secondary ide and changed the cable, also > reburned the cd at 4x. > > I set my dhcp server to statically give out ip to see if I could ssh into it > but I still could not get it after it hangs. > > > > System specs > > CPU: Celeron 2.6Ghz > > Board: Asus P4P800-MX (All hardware except for NIC is disabled, IDE mode is > set to compatible) > > Memory: 512Meg > > CDROM: LG GCE-8526B > > HD: WD160GB > > Mouse Keyboard are USB (Gyration) > > > > If anyone knows anything else I could try that would be great as I'd like to > start testing it on a real box. > > Wish I could post more output but I have to way to copy it out only retyping > L > > > > Thanks > > John Cianfarani > > > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]