That seemed to work great. The drive was found on boot and the
installer seemed to install fine.
Thank you for the very quick update.
Lynn
Scott Ullrich wrote:
Please try http://www.pfsense.com/~sullrich/LynnARoth.iso which
includes the Dell patch.
Scott
On 11/7/05, Lynn A. Roth <[EMAIL PROTECTED]> wrote:
I submitted this problem to freebsd-current and got a patch back. Is it
possible for me to build a kernel that has this patch and integrate it
into the pfSense install? (And how will this work with future upgrades?)
Lynn
Scott Ullrich wrote:
At this point I would suggest sending a message to freebsd-current and
ask why the drive is not working with 6-RC1.
Scott
On 11/1/05, Lynn A. Roth <[EMAIL PROTECTED]> wrote:
I get the same thing with FreeBSD 6.0 RC1. It boots to the installer
and then when attempting to install, it says it can't find a disk. The
controller is found as a SATA. Here is the relevant portion of dmesg
(this is from pfSense, but the RC1 looked the same)
atapci0: <Intel ICH7 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH7 SATA150 controller> port
0xac98-0xac9f,0xac90-0xac93,0xac80-0xac87,0xac78-0xac7b,0xac60-0xac6f
mem 0xfeb00000-0xfeb003ff irq 20 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ata4: <ATA channel 2> on atapci1
ata5: <ATA channel 3> on atapci1
Lynn
Scott Ullrich wrote:
It appears that FreeBSD is not seeing this drive as attached for some
reason. Can you try a FreeBSD RC disk?
On 11/1/05, Lynn A. Roth <[EMAIL PROTECTED]> wrote:
Some more info:
when I run atacontrol info, it appears that the disk is not attached. I
have booted to Linux and Windows installer and they both see the disk. I
believe that the SATA drive should be on ATA channel 2. (According to th
e boot messages, which show the ICH7 SATA Controller being detected with
4 channels, 2-5)
# atacontrol list
ATA channel 0:
Master: acd0 <HL-DT-ST GCR-8240N/1.06> ATA/ATAPI revision 4
Slave: no device present
ATA channel 1:
Master: no device present
Slave: no device present
ATA channel 2:
Master: no device present
Slave: no device present
ATA channel 3:
Master: no device present
Slave: no device present
ATA channel 4:
Master: no device present
Slave: no device present
ATA channel 5:
Master: no device present
Slave: no device present
Scott Ullrich wrote:
Please send the contents of /tmp/ after you receive the error message.
CTRL-C a number of times to break back to the shell and then SCP
then files somewhere.
Scott
On 11/1/05, Lynn A. Roth <[EMAIL PROTECTED]> wrote:
I should also note that it has a single SATA drive on the first SATA
connection. I get the same issue with both of the two identical systems.
Lynn
Scott Ullrich wrote:
What version?
On 11/1/05, Lynn A. Roth <[EMAIL PROTECTED]> wrote:
I'm having trouble installing pfSense to my new Dell PE 850.
The installer doesn't find a disk. If I do an lsdev before booting, I
see the disk and partitions. The system has a ICH7 chipset, which
appears to be problematic at this point in time. Does anyone have any
idea how I could get this installed? Is there a way to easily update
the kernel in the installer? Would that even help?
Thanks.
Lynn A. Roth
Network Administrator
Interactive Financial Solutions, Inc.
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]