Hi Scott Is this iso still available? I also need a copy of it. I tried getting it this morning but had no luck. Thanks Mark
Scott Ullrich wrote: Please try http://www.pfsense.com/~sullrich/LynnARoth.iso which includes the Dell patch.Scott On 11/7/05, Lynn A. Roth <[EMAIL PROTECTED]> wrote:I submitted this problem to freebsd-current and got a patch back. Is it possible for me to build a kernel that has this patch and integrate it into the pfSense install? (And how will this work with future upgrades?) Lynn Scott Ullrich wrote:At this point I would suggest sending a message to freebsd-current and ask why the drive is not working with 6-RC1. Scott On 11/1/05, Lynn A. Roth <[EMAIL PROTECTED]> wrote:I get the same thing with FreeBSD 6.0 RC1. It boots to the installer and then when attempting to install, it says it can't find a disk. The controller is found as a SATA. Here is the relevant portion of dmesg (this is from pfSense, but the RC1 looked the same) atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 atapci1: <Intel ICH7 SATA150 controller> port 0xac98-0xac9f,0xac90-0xac93,0xac80-0xac87,0xac78-0xac7b,0xac60-0xac6f mem 0xfeb00000-0xfeb003ff irq 20 at device 31.2 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 ata4: <ATA channel 2> on atapci1 ata5: <ATA channel 3> on atapci1 Lynn Scott Ullrich wrote:It appears that FreeBSD is not seeing this drive as attached for some reason. Can you try a FreeBSD RC disk? On 11/1/05, Lynn A. Roth <[EMAIL PROTECTED]> wrote:Some more info: when I run atacontrol info, it appears that the disk is not attached. I have booted to Linux and Windows installer and they both see the disk. I believe that the SATA drive should be on ATA channel 2. (According to th e boot messages, which show the ICH7 SATA Controller being detected with 4 channels, 2-5) # atacontrol list ATA channel 0: Master: acd0 <HL-DT-ST GCR-8240N/1.06> ATA/ATAPI revision 4 Slave: no device present ATA channel 1: Master: no device present Slave: no device present ATA channel 2: Master: no device present Slave: no device present ATA channel 3: Master: no device present Slave: no device present ATA channel 4: Master: no device present Slave: no device present ATA channel 5: Master: no device present Slave: no device present Scott Ullrich wrote:Please send the contents of /tmp/ after you receive the error message. CTRL-C a number of times to break back to the shell and then SCP then files somewhere. Scott On 11/1/05, Lynn A. Roth <[EMAIL PROTECTED]> wrote:I should also note that it has a single SATA drive on the first SATA connection. I get the same issue with both of the two identical systems. Lynn Scott Ullrich wrote:What version? On 11/1/05, Lynn A. Roth <[EMAIL PROTECTED]> wrote:I'm having trouble installing pfSense to my new Dell PE 850. The installer doesn't find a disk. If I do an lsdev before booting, I see the disk and partitions. The system has a ICH7 chipset, which appears to be problematic at this point in time. Does anyone have any idea how I could get this installed? Is there a way to easily update the kernel in the installer? Would that even help? Thanks. Lynn A. Roth Network Administrator Interactive Financial Solutions, Inc. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]--------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]--------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]--------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]--------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]--------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] |
- Re: [pfSense Support] Re: Trouble installing to Dell PowerEd... Scott Ullrich
- [pfSense Support] Re: Trouble installing to Dell Power... Lynn A. Roth
- Re: [pfSense Support] Re: Trouble installing to Dell Po... Mark Wass
- Re: [pfSense Support] Re: Trouble installing to Del... Scott Ullrich