1. What version 2. What do you see in the firewall filter logs regarding these connections
On 11/10/05, Lee Hetherington <[EMAIL PROTECTED]> wrote: > Ok, > > I have left and right pfsense boxes. On my opt1 interface I have a carp > setup: 85.116.x.1/27 is the network im using. My internal network is > then 192.168.x.0/24 > > I have 85.116.x.1 assigned as the virtual > I have 85.116.x.2 on left > 85.116.x.3 on right > > I want to load balance 85.116.x.1 inbound on port 25 to a pool i have > setup which contains: > > 192.168.x.1 > 192.168.x.4 > > The left and right also have > > 192.168.x.254 as virtual > 192.168.x.252 on left > 192.168.x.253 on right > > I have a firewall rule which allows * to connect on port 25 to the carp > address which is 85.116.x.1 > > The tcp connection just times out. At one point it was in the log > saying "bad gateway 85.116.x.1" > > Other than this, its exactly as described in the IncomingLoadBalancing > example on the wiki. > > Lee > > > Scott Ullrich wrote: > > >Many people have followed these and they work. You'll need to provide > >more information of how its all setup and what doesn't work. > > > >On 11/10/05, Lee Hetherington <[EMAIL PROTECTED]> wrote: > > > > > >>Hi Scott, > >> > >>I followed those exactly. And yet I still have no Joy :( > >> > >>Can anyone suggest anything which I may need to tick or the such which > >>may prevent this from working? > >> > >>Regards > >> > >>Lee > >> > >> > >> > >>Scott Ullrich wrote: > >> > >> > >> > >>>Try visiting these docs: > >>> > >>>http://wiki.pfsense.com/wikka.php?wakka=OutgoingLoadBalancing > >>>http://wiki.pfsense.com/wikka.php?wakka=IncomingLoadBalancing > >>> > >>>Scott > >>> > >>> > >>>On 11/10/05, Lee Hetherington <[EMAIL PROTECTED]> wrote: > >>> > >>> > >>> > >>> > >>>>Hi, > >>>> > >>>>Im new to pfsense and have two machines running 0.92 both with 2x Dual > >>>>Port 100+ Intel Management adaptors. I cannot for the life of me get > >>>>load balancing working. Here is how I have them setup: > >>>> > >>>>left.pfsense > >>>> > >>>>fxp1 Lan > >>>>fxp2 Cross Over cable to right.pfsense for sync > >>>>fxp3 DMZ Servers > >>>>fxp4 WAN > >>>> > >>>>right.pfsense > >>>> > >>>>fxp1 Lan > >>>>fxp2 Cross Over cable to right.pfsense for sync > >>>>fxp3 DMZ Servers > >>>>fxp4 WAN > >>>> > >>>>On my internal lan and wan I have carp's setup with virtual ip's. I wish > >>>>to use one of my virtual ip's to load balance mail to 2 servers on my > >>>>internal lan. I have it all setup as per on the wiki but I cannot get > >>>>anything through to the mailservers on the internal lan. I have a > >>>>firewall rule which allows * to connect to the virtual ip on port 25. > >>>> > >>>>Any ideas? please help. > >>>> > >>>>Lee > >>>> > >>>>--------------------------------------------------------------------- > >>>>To unsubscribe, e-mail: [EMAIL PROTECTED] > >>>>For additional commands, e-mail: [EMAIL PROTECTED] > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>--------------------------------------------------------------------- > >>>To unsubscribe, e-mail: [EMAIL PROTECTED] > >>>For additional commands, e-mail: [EMAIL PROTECTED] > >>> > >>> > >>>____________________________________________________________________ > >>>This e-mail has been scanned for viruses by Mailsauce. For further > >>>information visit http://www.mailsauce.com > >>> > >>> > >>> > >>> > >>> > >>> > >>> > >>--------------------------------------------------------------------- > >>To unsubscribe, e-mail: [EMAIL PROTECTED] > >>For additional commands, e-mail: [EMAIL PROTECTED] > >> > >> > >> > >> > > > >--------------------------------------------------------------------- > >To unsubscribe, e-mail: [EMAIL PROTECTED] > >For additional commands, e-mail: [EMAIL PROTECTED] > > > > > >____________________________________________________________________ > >This e-mail has been scanned for viruses by Mailsauce. For further > >information visit http://www.mailsauce.com > > > > > > > > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
