i can agree there but id almost like to see the config for the broken dhcp box and what card are is he using, if you post it please remove the passwords or any security information. Id also wonder if anyone else if using a similiar setup cause this is the first dhcp issue ive heard of
On Mon, 2005-11-14 at 09:57 -0500, Scott Ullrich wrote: > If there wasn't a problem then dropping a dhclient from FreeBSD 5 > wouldn't magically work in 100% of the cases. > > On 11/14/05, Lists <[EMAIL PROTECTED]> wrote: > > LOL ill just watch patiently to see where they change it in the FreeBSD > > cvs tree then :)) > > > > On Mon, 2005-11-14 at 09:42 -0500, Scott Ullrich wrote: > > > Oh really? Just like they know they have major fdisk problems? Come on. > > > > > > On 11/14/05, Lists <[EMAIL PROTECTED]> wrote: > > > > uhmmm im sure if there was an issue with dhcp on 6.0 they would already > > > > know about it, and all my 6.0 boxes dhcp fine. so I wonder why we > > > > question it to be FreeBSD and not a issue with pfsense? > > > > > > > > On Mon, 2005-11-14 at 09:33 -0500, Scott Ullrich wrote: > > > > > Any chance we can get a tcpdump of the process? I will most likely > > > > > have to send a message to freebsd-current about this. > > > > > > > > > > On 11/13/05, Emanuel A. Gonzalez <[EMAIL PROTECTED]> wrote: > > > > > > Well, I tried the 0.93.2 and it has the same behavior :( > > > > > > > > > > > > I tried with a different NIC for the WAN, but the problem seems the > > > > > > same. > > > > > > > > > > > > I'm posting my "system.log", I replaced the IP addresses like this: > > > > > > > > > > > > XXX.XXX.XXX.XXX -> Gateway address > > > > > > YYY.YYY.YYY.YYY -> IP address assigned to the WAN interface > > > > > > BBB.BBB.BBB.BBB -> Broadcast address > > > > > > DNS.DNS.DNS.DNS -> DNS server address > > > > > > > > > > > > I hope this may be useful. > > > > > > > > > > > > > > > > > > I'm going back to 0.92 again :( > > > > > > > > > > > > > > > > > > Thanks Scott, I'll wait for the next release to give it a try :) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Emanuel Gonzalez > > > > > > Guatemala > > > > > > > > > > > > -----Mensaje original----- > > > > > > De: Emanuel A. Gonzalez [mailto:[EMAIL PROTECTED] > > > > > > Enviado el: Domingo, 13 de Noviembre de 2005 09:25 p.m. > > > > > > Para: support@pfsense.com > > > > > > Asunto: RE: [pfSense Support] WAN DHCP not working ? > > > > > > > > > > > > Surf to: http://www.pfsense.com/~sullrich/ > > > > > > > > > > > > Thanks Scott, I'll try it tonight... > > > > > > > > > > > > > > > > > > -----Mensaje original----- > > > > > > De: Lists [mailto:[EMAIL PROTECTED] > > > > > > Enviado el: Domingo, 13 de Noviembre de 2005 09:21 p.m. > > > > > > Para: support@pfsense.com > > > > > > Asunto: Re: [pfSense Support] WAN DHCP not working ? > > > > > > > > > > > > where is this image ? > > > > > > > > > > > > On Sun, 2005-11-13 at 21:34 -0500, Scott Ullrich wrote: > > > > > > > Image updated. Please give it a try in the ~sullrich directory. > > > > > > > > > > > > > > On 11/13/05, Emanuel A. Gonzalez <[EMAIL PROTECTED]> wrote: > > > > > > > > Thanks again Scott! > > > > > > > > > > > > > > > > > > > > > > > > -----Mensaje original----- > > > > > > > > De: Scott Ullrich [mailto:[EMAIL PROTECTED] > > > > > > > > Enviado el: Domingo, 13 de Noviembre de 2005 06:39 p.m. > > > > > > > > Para: support@pfsense.com > > > > > > > > Asunto: Re: [pfSense Support] WAN DHCP not working ? > > > > > > > > > > > > > > > > That is the issue we just solved. I am building a new version. > > > > > > > > > > > > > > > > On 11/13/05, Emanuel A. Gonzalez <[EMAIL PROTECTED]> wrote: > > > > > > > > > I was working on 0.90a version, and since version 0.62.3 the > > > > > > > > > DHCP on > > > > > > my > > > > > > > > wan > > > > > > > > > was working fine. > > > > > > > > > > > > > > > > > > Today I upgraded to a 0.93 version, which I downloaded from a > > > > > > "sullrich" > > > > > > > > > link (I know this is not an official release). Now, my dhcp > > > > > > > > > wan > > > > > > doesn't > > > > > > > > > work, it assign an IP address for about 20 secs. And then it > > > > > > > > > release > > > > > > it, > > > > > > > > and > > > > > > > > > re-assign it after 20 or 30 secs. > > > > > > > > > > > > > > > > > > I try using a static IP on my wan interface, since my ISP > > > > > > > > > uses a DHCP > > > > > > > > server > > > > > > > > > but it always assigns me the same public IP (that's funny), > > > > > > > > > but it > > > > > > works > > > > > > > > > almost the same way. I can ping for about 10 times, then the > > > > > > connections > > > > > > > > > drops, then again it restore my connection and I can ping > > > > > > > > > again. This > > > > > > is > > > > > > > > > odd. > > > > > > > > > > > > > > > > > > I decided to downgrade to 0.90a, and the wan DHCP client it's > > > > > > > > > working > > > > > > fine > > > > > > > > > again. > > > > > > > > > > > > > > > > > > I'm sorry for hijacking another post, I just intended to > > > > > > > > > help, maybe > > > > > > this > > > > > > > > is > > > > > > > > > a bug :) > > > > > > > > > > > > > > > > > > Thanks again for all your support, we are more than satisfied > > > > > > > > > with > > > > > > your > > > > > > > > > outstanding job! > > > > > > > > > > > > > > > > > > > > > > > > > > > Emanuel Gonzalez > > > > > > > > > Guatemala. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Mensaje original----- > > > > > > > > > De: Scott Ullrich [mailto:[EMAIL PROTECTED] > > > > > > > > > Enviado el: Domingo, 13 de Noviembre de 2005 03:10 a.m. > > > > > > > > > Para: support@pfsense.com > > > > > > > > > Asunto: Re: [pfSense Support] WAN DHCP not working ? > > > > > > > > > > > > > > > > > > DHCP generally "just works". I would verify that your > > > > > > > > > hardware is > > > > > > > > > FreeBSD friendly at this point as it can be very picky. > > > > > > > > > > > > > > > > > > Scott > > > > > > > > > > > > > > > > > > On 11/13/05, Ulrik S. Kofod <[EMAIL PROTECTED]> wrote: > > > > > > > > > > I'm finally ready to go live with this box, replacing a > > > > > > > > > > really > > > > > > horrible > > > > > > > > > router that > > > > > > > > > > has to be reset every now and then (daily). > > > > > > > > > > > > > > > > > > > > I unplugged the old router and inserted the WAN cable from > > > > > > > > > > the DSL > > > > > > modem > > > > > > > > > into the > > > > > > > > > > WAN interface on the pfSense box, I then checked the > > > > > > > > > > interfaces > > > > > > status > > > > > > > > > page and > > > > > > > > > > could se that the link was up and dhcp said up but the IP > > > > > > > > > > address > > > > > > was > > > > > > > > > 0.0.0.0 and > > > > > > > > > > netmask was 255.0.0.0. I tried to release it at renew a few > > > > > > > > > > times > > > > > > but > > > > > > > > > without > > > > > > > > > > result. I then tested it in the OPT1 interface with same > > > > > > > > > > result. > > > > > > > > > > > > > > > > > > > > The WAN and OPT1 interfases are both setup to get an IP > > > > > > > > > > from DHCP, > > > > > > > > nothing > > > > > > > > > else > > > > > > > > > > changed. > > > > > > > > > > > > > > > > > > > > I added a print screen of it here if my explanation is a > > > > > > > > > > little > > > > > > > > confusing > > > > > > > > > :) > > > > > > > > > > http://www.cybersite.dk/wan_dhcp.GIF > > > > > > > > > > > > > > > > > > > > Do I need to setup anything except make sure the interface > > > > > > > > > > is setup > > > > > > as > > > > > > > > > DHCP like the > > > > > > > > > > on old router? > > > > > > > > > > > > > > > > > > > > Best regards > > > > > > > > > > Ulrik > > > > > > > > > > > > > > > > > > > > PS. I reinstalled the old router and it got the IP like it > > > > > > > > > > should. > > > > > > > > > > PPS. I'm using pfSense version 0.92 on a 233MHz pentium > > > > > > > > > > with 64MB > > > > > > memory > > > > > > > > > and a 2GB HDD. > > > > > > > > > > PPPS. Apart from WAN and OPT1 I also have a LAN and WLAN > > > > > > > > > > interfase > > > > > > with > > > > > > > > > static IP. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > > > > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > > > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > -- > > > > > > > > > Se certificó que el correo Saliente no contiene virus. > > > > > > > > > Verificado por Anti-Virus AVG. > > > > > > > > > Versión: 7.1.362 / Base de datos de virus: 267.13.0/167 - > > > > > > > > > Fecha de la > > > > > > > > > versión: 11/11/2005 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > > > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > -- > > > > > > > > Se certificó que el correo Saliente no contiene virus. > > > > > > > > Verificado por Anti-Virus AVG. > > > > > > > > Versión: 7.1.362 / Base de datos de virus: 267.13.0/167 - Fecha > > > > > > > > de la > > > > > > > > versión: 11/11/2005 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > -- > > > > > > Se certificó que el correo Saliente no contiene virus. > > > > > > Verificado por Anti-Virus AVG. > > > > > > Versión: 7.1.362 / Base de datos de virus: 267.13.0/167 - Fecha de > > > > > > la > > > > > > versión: 11/11/2005 > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > -- > > > > > > Se certificó que el correo Saliente no contiene virus. > > > > > > Verificado por Anti-Virus AVG. > > > > > > Versión: 7.1.362 / Base de datos de virus: 267.13.0/167 - Fecha de > > > > > > la > > > > > > versión: 11/11/2005 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
