On 11/18/05, John Cianfarani <[EMAIL PROTECTED]> wrote: > Ah okay I was figuring it would always try to keep it up. Any thing I > can do from within the pfsense box itself to keep the tunnel up?
As long as traffic is going through the tunnel, it should stay up. In my case I have a IP phone and never notice an issue. > Is traffic shapping over Ipsec out of the question at the moment? Yep. > Thanks > John > > -----Original Message----- > From: Scott Ullrich [mailto:[EMAIL PROTECTED] > Sent: Friday, November 18, 2005 11:57 AM > To: support@pfsense.com > Subject: Re: [pfSense Support] IPsec Does Auto Establish work? > > On bootup or after initial setup of the tunnel, pfSense will ping > across the tunnel to bring it up. > > Scott > > On 11/17/05, John Cianfarani <[EMAIL PROTECTED]> wrote: > > > > > > > > Does anyone have IPSec tunnels auto establish working? I can only > seem to > > get the tunnels to come up when traffic is passing over them. > > > > > > > > Also wondering if there is anything special that needs to be done to > do > > traffic shapping through an IPSec tunnel? > > > > > > > > Thanks > > > > John > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
