The embedded image uses a serial console. I know nothing about the Lex, but if you are using VGA with it, then this is as far as you'll see it boot - try hooking up a serial cable.
--Bill On 11/23/05, Adam Armstrong <[EMAIL PROTECTED]> wrote: > Hi, > > I have a Lex box (the CV860A), but I can't get it to boot any version of > pfSense. > > I'm trying to use the embedded image, but every one I've tried over the past > few weeks has hung at right after 'Loading /boot/defaults/loader.conf'. > > The little spinning line spins a few times and then just stops. I've tried > changing the bios settings I thought would make a difference, but to no > avail. > > I'm currently trying 0.94.10, but I've tried a lot of other images and every > one of them locks at the same point! > > Kind Regards, > Adam. > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]