Thanks, I was able to locate the problem and commit a fix. Expect it in the next version.
Scott On 12/9/05, John Cianfarani <[EMAIL PROTECTED]> wrote: > Clicking on a MAC would show that. Clicking on the Wake all does not > show it. > > Thanks > John > > -----Original Message----- > From: Scott Ullrich [mailto:[EMAIL PROTECTED] > Sent: Friday, December 09, 2005 1:45 PM > To: support@pfsense.com > Subject: Re: [pfSense Support] Wake on Lan > > When you click on the wake all button, do you see something like: > > Sent magic packet to MAC-ADDRESS-1 > Sent magic packet to MAC-ADDRESS-2 > ... > etc? > > On 12/9/05, John Cianfarani <[EMAIL PROTECTED]> wrote: > > > > > > > > Running 94.2 on a Wrap at the moment. Not sure if this was fixed in a > newer > > release. > > > > But I noticed the "Wake All Clients" button in the WOL config doesn't > seem > > to work. > > > > I have a few servers (Dell PowerEdge) that wake up fine a few seconds > later > > after clicking the MAC address, but will never come up when using the > "Wake > > All" button. > > > > > > > > Let me know if you need more info. > > > > > > > > Thanks > > > > John > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]