Yes, keyboard and serial is disabled. all output appears at com1 9600 baud. And no, it's not nic independent. the driver has to support it. the ep-driver doesn't do afaik. check this for more details: http://forum.pfsense.org/index.php?topic=16.0
Holger > -----Ursprüngliche Nachricht----- > Von: Jure Pecar [mailto:[EMAIL PROTECTED] > Gesendet: Montag, 19. Dezember 2005 11:58 > An: support@pfsense.com > Betreff: [pfSense Support] two problems > > > > Hi all, > > On one system I'm trying to install pfSense on usb key. The > procedure goes ok (lots of synchronize cache failed msgs tho) > and I can boot from usb afterward just fine. But if I enable > serial port via webui, I cannot boot from usb anymore. Bios > just sits th > ere with | (and not spinning /-\| thing indicating the > bootloader start). Question: does this 'enable serial port' > disables vga console? Because I didn't check if there's > something going on on serial ... > > On some other older system with rl0 and ep0 cards, I get this > message from traffic shaper wizard: "Either your LAN or WAN > interface doesn't suport ALTQ. The wizard cannot continue." > ... strange. I thought ALTQ is not dependant on nic type? > > -- > > Jure Pecar > http://jure.pecar.org > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > ____________ Virus checked by G DATA AntiVirusKit