Can I/we just have a /etc/current-supfile with: *default host=cvs.pfsense.com *default base=/root/pfSense *default release=cvs *default delete use-rel-suffix RELENG_1 *default compress
On Mon, 2006-04-10 at 14:30 -0400, Scott Ullrich wrote: > Please explain how you upgraded from a snapshot? > > cvs_sync.sh? If so, did you happen to forget the RELENG_1 portion? > > On 4/10/06, William Armstrong <[EMAIL PROTECTED]> wrote: > > I upgrade direct from snapshot and get this errors > > I create all rules again and get this error > > > > 2006/4/10, Bill Marquette <[EMAIL PROTECTED]>: > > > Haven't seen that one before (and I just upgraded my main box to the > > > 4-08 snapshot). What happens if you delete that rule (I assume it's > > > not needed based on your wording)? > > > > > > --Bill > > > > > > On 4/10/06, William Armstrong <[EMAIL PROTECTED]> wrote: > > > > phantom rule is inserted on my system config.xml > > > > > > > > <rule> > > > > <type>pass</type> > > > > <interface>opt3</interface> > > > > <max-src-nodes/> > > > > <max-src-states/> > > > > <statetimeout/> > > > > <statetype>keep state</statetype> > > > > <os/> > > > > <max-src-conn-rate/> > > > > <max-src-conn-rates/> > > > > <source> > > > > <any/> > > > > </source> > > > > <destination> > > > > <any/> > > > > </destination> > > > > <descr/> > > > > </rule> > > > > > > > > > > > > there were error(s) loading the rules: /tmp/rules.debug:393: syntax > > > > errorpfctl: Syntax error in config file: pf rules not loaded - The > > > > line in question reads [393]: label "USER_RULE" ... > > > > > > > > > > > > # /tmp/debug.rules > > > > > > > > pass in quick on $wan proto udp from any to { 10.0.1.3 } port = 4712 > > > > keep state queue (qwandef, qwanacks) label "USER_RULE: NAT LAN" > > > > pass in quick on $wan proto udp from any to { 10.0.1.3 } port = 2213 > > > > keep state queue (qwandef, qwanacks) label "USER_RULE: NAT RAID" > > > > ------>>>>> label "USER_RULE" <<<<<------------ > > > > # opt3 array key does not exist for label "USER_RULE" > > > > > > > > > > > > partial dmesg > > > > > > > > fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd800-0xd83f mem > > > > 0xe4800000-0xe4800fff,0xe4000000-0xe40fffff irq 9 at device 9.0 on > > > > pci1 > > > > miibus0: <MII bus> on fxp0 > > > > inphy0: <i82555 10/100 media interface> on miibus0 > > > > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > > > fxp0: Ethernet address: 00:02:b3:3a:42:f2 > > > > dc0: <82c169 PNIC 10/100BaseTX> port 0xd400-0xd4ff mem > > > > 0xe3800000-0xe38000ff at device 10.0 on pci1 > > > > miibus1: <MII bus> on dc0 > > > > bmtphy0: <BCM5201 10/100baseTX PHY> on miibus1 > > > > bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > > > dc0: Ethernet address: 00:a0:cc:5a:14:dd > > > > xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd000-0xd07f mem > > > > 0xe3000000-0xe300007f irq 11 at device 11.0 on pci1 > > > > miibus2: <MII bus> on xl0 > > > > xlphy0: <3c905C 10/100 internal PHY> on miibus2 > > > > xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > > > xl0: Ethernet address: 00:01:02:38:ff:81 > > > > xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xb800-0xb87f mem > > > > 0xe2800000-0xe280007f irq 5 at device 12.0 on pci1 > > > > miibus3: <MII bus> on xl1 > > > > ukphy0: <Generic IEEE 802.3u media interface> on miibus3 > > > > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > > > xl1: Ethernet address: 00:01:03:df:83:3f > > > > > > > > > > > > *** Welcome to pfSense RELENG_1_SNAPSHOT_04-08-2006-pfSense on cerberus > > > > *** > > > > > > > > WAN* -> fxp0 -> 192.168.33.2 > > > > OPT2(OPT2) -> dc0 -> NONE > > > > LAN* -> xl0 -> 10.0.1.1 > > > > OPT1(OPT1) -> xl1 -> NONE > > > > > > > > > > > > > > > > -- > > > > -=-=-=-=-=-=-=-=-=- > > > > William David Armstrong <----. Of course it runs > > > > Bio Systems Security.Networking <----|============================ > > > > Hinodeinfo Soluções em Informática <----' NetBSD, OpenBSD or FreeBSD > > > > ICQ 27550645 > > > > MSN / GT Ψ biosystems ∆ gmail . com Ψ > > > > -------------------------------------- > > > > > > > > > > > > > -- > > -=-=-=-=-=-=-=-=-=- > > William David Armstrong <----. Of course it runs > > Bio Systems Security.Networking <----|============================ > > Hinodeinfo Soluções em Informática <----' NetBSD, OpenBSD or FreeBSD > > ICQ 27550645 MSN / GT Ψ biosystems ∆ gmail . com Ψ > > -------------------------------------- > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]