The slbd errors can be safely ignored for WAN load balancing - I've replied that elsewhere (forum I believe) and will be cleaning up those info messages for RC1. I'll need a copy of your /tmp/rules.debug, /var/etc/slbd.conf, and /conf/config.xml and a netstat -rn output would be useful to determine your routing table.
Thanks --Bill On 4/18/06, Josh <[EMAIL PROTECTED]> wrote: > > It appears that upgrading to beta3 has killed my load balancing. I originally > had the monitor IPs the same for both gateways but have since corrected that. > I am using the gateway on both interfaces as the monitor IP. With the failed > load balancing I have also started to notice a failed message appearing in my > logs. > > This is from my Load Balance Log section > > Apr 18 11:12:28 slbd[2134]: Service changed status, reloading filter policy > Apr 18 11:12:28 slbd[2134]: Switching to sitedown for VIP 127.0.0.1:666 > Apr 18 11:12:28 slbd[2134]: TCP poll failed to start to 68.x.x.x:666 in > default (Operation now in progress) (IP= WAN Gateway) > > Apr 18 11:12:28 slbd[2134]: TCP poll failed to start to 66.x.x.xx:666 in > default (Operation now in progress) (IP=OPT1 Gateway) > > Apr 18 11:12:28 slbd[2134]: VIP 127.0.0.1:666 added real service > 68.x.x.x:666 (IP= WAN Gateway) > Apr 18 11:12:28 slbd[2134]: VIP 127.0.0.1:666 added real service > 66.x.x.x:666 (IP=OPT1 Gateway) > Apr 18 11:12:28 slbd[2134]: VIP 127.0.0.1:666 sitedown at 127.0.0.1:666 > Apr 18 11:12:28 slbd[2134]: VIP 127.0.0.1:666 configured as "127.0.0.1" > Apr 18 11:12:28 slbd[2134]: Using configuration file /var/etc/slbd.conf > Apr 18 11:12:28 slbd[2134]: Using r_refresh of 5000 milliseconds > > > This is the log under system > > > Apr 18 11:12:39 php: : There were error(s) loading the rules: > /tmp/rules.debug:220: syntax error pfctl: Syntax error in config file: pf > rules not loaded - The line in question reads [220]: label "USER_RULE" > Apr 18 11:12:33 php: : FTP proxy disabled for interface opt1 - ignoring. > Apr 18 11:12:28 slbd[2134]: Service changed status, reloading filter policy > Apr 18 11:12:28 slbd[2134]: Switching to sitedown for VIP 127.0.0.1:666 > Apr 18 11:12:28 slbd[2134]: TCP poll failed to start to 68.x.x.x:666 in > default (Operation now in progress) (IP= WAN Gateway) > Apr 18 11:12:28 slbd[2134]: TCP poll failed to start to 66.x.x.x:666 in > default (Operation now in progress) (IP=OPT1 Gateway) > > > > Most of the above log entry's I pasted are 'new' as in I didn't see these > errors until after 2 reboots & recreating the load balanced rule from scratch > with the gateways as the monitor IPs. Before I recreated the load balance > rule and load balanced the only noticible error was. > : There were error(s) loading the rules: /tmp/rules.debug:220: syntax error > pfctl: Syntax error in config file: pf rules not loaded - The line in > question reads [220]: label "USER_RULE > > > Let me know of any suggestions you may have or if you need additional > information from me. > Wan interface = DHCP (with static gateway) > Opt1 interface = static > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]