a whopin 192MB and yes I had to ditch the swap.....sloooooooow but it was
just for testing :) Ive learned my lesson on live updates to production
systems :)
----- Original Message -----
From: "Bill Marquette" <[EMAIL PROTECTED]>
To: <support@pfsense.com>
Sent: Wednesday, April 26, 2006 9:43 PM
Subject: Re: [pfSense Support] Beta 2/3 CF Box reboots all the time
How much RAM in the box? Just a guess, you used a swap partition with
the hard drive install, but didn't with the CF install (gee, I can't
possibly imagine why not ;-P) and have less than 64M ram.
--Bill
On 4/26/06, Tim Roberts <[EMAIL PROTECTED]> wrote:
I have a piece of junk test box that Beta 3 loaded fine with a 20gb hdd. I
slid a spare Sybia CF-IDE adapter and a 512MB CF card in and Beta 3 ISO
goes
through install just fine. Upon bootup it almost gets to the console menu
when it reboots. It does this over and over. I can load Beta 1 on the same
setup fine but not 2 or 3.
Any ideas? Better IDE-CF adapter? Can anyone recommend a winning combo
with
brand name of media? I have had many issues in the past and usually just
play around with different mainboards until I find one thats happy, but
this
appears to be PFSense related.
Mainboard is an old AOpen ATX P3Slot 1 with BX chipset.
Thanks in advance
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
