Hi, Here I'm again with my notorious carp problem. :( I have created an infinite time this dual wan load-balancing carp configuration. The problem is that whatever I do the carp3 on xl2 become MASTER-MASTER which is my DMZ subnet. It doesn't matter if it si with dial or single wan, or with, or without load balance or on which interface is it created. I have already changed cards, switches, cables. I have always used the wizard for carp creation. After creation sometimes it remains correct until I force a failover (ie. reboot one of the carp machines) What's more interesting, pe. on friday I have created it and it remained correct until Monday morning when I rebooted the master box and this made an end for this hopeful situation. :( Theoretically there is a command, (ifconfig carpx state backup) which could force the state, but it doesn't work (reference: http://www.openbsd.org/faq/pf/carp.html ) I have pasted in my ifconfig output from both machines. Someone may find what's wrong. It is works as expected on all other interfaces.
Sorry for this long long letter. Best regards Imre Ispanovits ################################################ pfsense1 xl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 options=9<RXCSUM,VLAN_MTU> inet xxx.yyy.zzz.163 netmask 0xfffffff8 broadcast xxx.yyy.zzz.167 inet6 fe80::204:76ff:fe0c:f8fa%xl0 prefixlen 64 scopeid 0x1 ether 00:04:76:0c:f8:fa media: Ethernet autoselect (10baseT/UTP) status: active xl1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 options=9<RXCSUM,VLAN_MTU> inet 192.168.0.3 netmask 0xfffffc00 broadcast 192.168.3.255 inet6 fe80::201:2ff:fe0b:4e9b%xl1 prefixlen 64 scopeid 0x2 ether 00:01:02:0b:4e:9b media: Ethernet autoselect (100baseTX <full-duplex>) status: active fxp0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 options=8<VLAN_MTU> inet xxx.yyy.zzz.114 netmask 0xfffffff8 broadcast xxx.yyy.zzz.119 inet6 fe80::290:27ff:fec6:b47e%fxp0 prefixlen 64 scopeid 0x3 ether 00:90:27:c6:b4:7e media: Ethernet autoselect (10baseT/UTP) status: active xl2: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 options=9<RXCSUM,VLAN_MTU> inet 10.0.254.200 netmask 0xffffff00 broadcast 10.0.254.255 inet6 fe80::201:2ff:fe0b:4e95%xl2 prefixlen 64 scopeid 0x4 ether 00:01:02:0b:4e:95 media: Ethernet autoselect (100baseTX <full-duplex>) status: active ep0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 192.168.200.1 netmask 0xfffffffc broadcast 192.168.200.3 inet6 fe80::220:afff:fe42:7b85%ep0 prefixlen 64 scopeid 0x5 ether 00:20:af:42:7b:85 media: Ethernet 10baseT/UTP pflog0: flags=100<PROMISC> mtu 33208 pfsync0: flags=41<UP,RUNNING> mtu 1348 pfsync: syncdev: ep0 maxupd: 128 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x8 carp0: flags=49<UP,LOOPBACK,RUNNING> mtu 1500 inet xxx.yyy.zzz.165 netmask 0xfffffff8 carp: MASTER vhid 1 advbase 1 advskew 0 carp1: flags=49<UP,LOOPBACK,RUNNING> mtu 1500 inet xxx.yyy.zzz.116 netmask 0xfffffff8 carp: MASTER vhid 2 advbase 1 advskew 0 carp2: flags=49<UP,LOOPBACK,RUNNING> mtu 1500 inet 192.168.0.10 netmask 0xfffffc00 carp: MASTER vhid 3 advbase 1 advskew 0 carp3: flags=49<UP,LOOPBACK,RUNNING> mtu 1500 inet 10.0.254.199 netmask 0xffffff00 carp: MASTER vhid 4 advbase 1 advskew 0 pfsense2 xl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 options=9<RXCSUM,VLAN_MTU> inet xxx.yyy.zzz.164 netmask 0xfffffff8 broadcast xxx.yyy.zzz.167 inet6 fe80::201:2ff:fe0b:b2c9%xl0 prefixlen 64 scopeid 0x1 ether 00:01:02:0b:b2:c9 media: Ethernet autoselect (10baseT/UTP) status: active xl1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 options=9<RXCSUM,VLAN_MTU> inet 192.168.0.8 netmask 0xfffffc00 broadcast 192.168.3.255 inet6 fe80::201:3ff:fed7:1f7d%xl1 prefixlen 64 scopeid 0x2 ether 00:01:03:d7:1f:7d media: Ethernet autoselect (100baseTX <full-duplex>) status: active fxp0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 options=8<VLAN_MTU> inet xxx.yyy.zzz.115 netmask 0xfffffff8 broadcast xxx.yyy.zzz.119 inet6 fe80::290:27ff:fec6:c218%fxp0 prefixlen 64 scopeid 0x3 ether 00:90:27:c6:c2:18 media: Ethernet autoselect (10baseT/UTP) status: active xl2: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 options=9<RXCSUM,VLAN_MTU> inet 10.0.254.201 netmask 0xffffff00 broadcast 10.0.254.255 inet6 fe80::201:2ff:fe0b:b2ed%xl2 prefixlen 64 scopeid 0x4 ether 00:01:02:0b:b2:ed media: Ethernet autoselect (100baseTX <full-duplex>) status: active ep1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 192.168.200.2 netmask 0xfffffffc broadcast 192.168.200.3 inet6 fe80::220:afff:feba:4dc9%ep1 prefixlen 64 scopeid 0x5 ether 00:20:af:ba:4d:c9 media: Ethernet 10baseT/UTP pflog0: flags=100<PROMISC> mtu 33208 pfsync0: flags=41<UP,RUNNING> mtu 1348 pfsync: syncdev: ep1 maxupd: 128 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x8 carp0: flags=49<UP,LOOPBACK,RUNNING> mtu 1500 inet xxx.yyy.zzz.165 netmask 0xfffffff8 carp: BACKUP vhid 1 advbase 1 advskew 100 carp1: flags=49<UP,LOOPBACK,RUNNING> mtu 1500 inet xxx.yyy.zzz.116 netmask 0xfffffff8 carp: BACKUP vhid 2 advbase 1 advskew 100 carp2: flags=49<UP,LOOPBACK,RUNNING> mtu 1500 inet 192.168.0.10 netmask 0xfffffc00 carp: BACKUP vhid 3 advbase 1 advskew 100 carp3: flags=49<UP,LOOPBACK,RUNNING> mtu 1500 inet 10.0.254.199 netmask 0xffffff00 carp: MASTER vhid 4 advbase 1 advskew 100 #############################################
signature.asc
Description: PGP signature