I'm sorry if this is common knowledge, I did not get anywhere by trawling the forum and mailing list archives.
I have a dual wan setup (WAN, OPT1), my ISP has provided me two public IP addresses in the same subnet and both have the same ISP gateway. I have an internal web server on my LAN that needs to be accessible through both the wan links. I have setup the WAN and OPT1 interfaces in pfSense. WAN contains the default route. Port forwarding is working perfectly on WAN, but OPT1 stops forwarding packets after a few minutes. Tcpdump shows the packets entering OPT1, but the corresponding packets are not leaving the LAN interface. Before I start spending more time on troubleshooting this, I would like to know if dual wan with same isp gateway for port forwarding is a workable setup. Or should I put nat routers infront of pfSense and provide each wan link a different gateway? Please note that I'm not running outgoing load balancing on this setup. Thanks for any help! - Raja --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
