Hi, i have pfsense taked yesterday in production use (SNAPSHOT from 2006-09-26). My configuration is wan public.226/28 DMZ public.241/28 lan privateip/24
now i have the Problem my config for ftp-proxying our ftp-server is probably wrong. i can connect to the ftp, but it passed only one type of ftp-connect's (active or passive, be not sure). i say our ftp.server is on public.247 so i must redirect all ftp connects to the ftp-proxy-helper, but i be not sure how. i have diabled the automatic nat rules, and need also the right rules for outboud ftp sessions. at the time i have configured outbound nat only for our privatenet except the DMZ-NET. Another question is abount /etc/sysctl.conf. I have made an entry for proxyarp, while out interconnect disconnects the dmz-nt if they get no arp addresses (for me this is bullshit, security-leak) but he doesn't work otherwise. Get the /etc/sysctl mangled or changes by an update? if so, if there another possibility to change net.link.ether.inet.proxyall to 1 ? (default 0 ). thank a lot regards michael --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]