I've made a test with the Radius Session-Timeout attributes, but somehow it didn't work.
First I tried using the "Hard timeout" option from the Captive Portal page, and after 45 minutes, as I had programmed, the client was disconnected. After that, I left the Hard timeout field blank and enabled the "Use RADIUS Session-Timeout attributes", but nothing happened. The radius server is sending the attributes with a value of 28800 (8 hours), but the user wasn't disconnected. I tried the same thing again again reducing the time to 1800 (30 minutes), then to 900 (15 minutes), but again the client wasn't disconnected. I've checked the reply packets from the radius server (Freeradius 1.1.3), and the Session-Timeout attribute is being sent properly. The Radius is sending the following attributes, along with the authorization: Framed-Compression=Van-Jacobsen-TCP-IP Framed-Protocol=PPP Service-Type=Framed-User Framed-MTU=1500 Session-Timeout=1800 In short, using the "Hard Timeout" options seems to be working properly, but "Use RADIUS Session-Timeout attributes" is not. Roberto -- ------------------------------------------------------------------- | Marcos Roberto Greiner | | | | Os otimistas acham que estamos no melhor dos mundos | | Os pessimistas tem medo de que isto seja verdade | | Murphy | ------------------------------------------------------------------- | [EMAIL PROTECTED] | ------------------------------------------------------------------- --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]