Hmmm... I'm doing something wrong.
I got it to assign my laptop the proper address.
I did this:
Then go to firewall/rules/lan2tab
Add a rule: pass, protocol any, source (IP of notebook),
destination any, gateway default
Then I did this:
Below this add a rule: pass protocol any, source lan2 net,
destination NOT LAN, gateway default
Which is where I went wrong.
I've put in the following: Action - Pass; Interface - LAN2; Protocol
- Any; Source - LAN2 subnet; Destination - NOT 'LAN subnet'; Gateway
- default.
I think the problem is with my Source/Destination type... once rules
are applied, they go into effect as soon as the filter is reloaded,
correct?
My main goal is to make LAN totally invisible as far as LAN2 is
concerned.
Thank you again for your help.
Mahalo,
Jeremy
On Feb 26, 2007, at 1:13 AM, Holger Bauer wrote:
First create a DHCP-server fort he LAN2 segment at services/
dhcpserver/lan2-tab and add a static mapping for the mac of your
notebook.
Then go to firewall/rules/lan2tab
Add a rule: pass, protocol any, source (IP of notebook),
destination any, gateway default
Below this add a rule: pass protocol any, source lan2 net,
destination NOT LAN, gateway default
That's all that is needed.
Holger
-----Ursprüngliche Nachricht-----
Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Gesendet: Montag, 26. Februar 2007 10:39
An: [email protected]
Betreff: [pfSense Support] new user... need help with Rules
I have pFsense 1.0.1, with a WAN, LAN and LAN2. The WAN gets an
address
via DHCP from local cable provider. LAN (192.168.12.1) is my (soon
to be)
private network, and LAN2 (192.168.12.1) has a couple of wireless
bridges/APs at 192.168.12.253 & 254. What I need to do is create a
rule
that blocks traffic between LAN2 and LAN, yet still allows my laptop
(192.168.12.99, assigned via MAC/static) to access LAN while
wirelessly
connected to LAN2. Any help or guidance on this is much appreciated.
Mahalo,
Jeremy
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
